Captglasshole's latest activity
-
CHow lucky could I get not only did I find a hardtop for my seaferor. It was 5 miles away came off a 88 seaferor and only paid $450 for...
-
CCaptglasshole replied to the thread Updating 1988 242G.Yeah, one of my previous boats was a mako that had a notched transom. Always made me nervous when that splashwell would fill up. Had a...
-
CThe nice thing about painting is that you can do anything you want underneath! Caulk and paint hide what ain't :) That's an old saying...
-
CCaptglasshole replied to the thread Updating 1988 242G.Got out yesterday for the first trip of the year with the kiddo's. Nice to have a solid floor to walk on. I did the oil change/gear...
-
CCaptglasshole replied to the thread Seafarer 228 Transom Rot?.My 1988 242 (bracketed offshore) has a solid transom.
-
CCaptglasshole replied to the thread Clearly I know nothing about wiring.My starboard nav light is blown out too. Can you send me the link for the one you bought?
-
CCaptglasshole replied to the thread Updating 1988 242G.Yeah.....I found that out the hard way. I made a bonehead mistake when I bedded the core down too. I used my big RTIC 145 with my...
-
CLooks good! Laying that big sheet of ply in place in one shot, you likely have some air bubbles (it's almost impossible to avoid when...
-
CCaptglasshole replied to the thread Updating 1988 242G.Well, she is in. I took DennisG's advice and didn't take the core all the way to the edge. I also mixed up a batch of peanut butter...
-
-
CCaptglasshole replied to the thread Jumping out of my skin - anyone else?.Calling for 75 and light winds here in Ocean City, MD this Sunday. I'll be out flounder fishing with the kiddo's for my first trip of...
-
CCaptglasshole replied to the thread Total Boat Total Total Tread Colors.I haven't mixed it, but my buddy used the sand beige on his steiger craft. I'm going to go with that when I redo my floor after I'm...
-
CCaptglasshole replied to the thread 2003 Grady 232 Gulfstream.My buddy has one with a F250 and he wishes he had a 300. The yamaha 225 is a weak 225 (closer to 208-210hp). I think you will be...
-
CLooking good! Not sure what tools you are using, but if you have more panels to do... An oscillating tool with a cutoff blade or even...
-
CCaptglasshole replied to the thread Updating 1988 242G.Most of the wood came up with the pry bar on this panel. My grinder with a 60 grit made quick work of anything still stuck on there...
-
CCaptglasshole replied to the thread Updating 1988 242G.All my fiberglass stuff is in, just waiting on the weather to warm up a bit so my resin is able to do its thing. I took advantage of...
-
