DennisG01's latest activity
-
DDennisG01 replied to the thread Need to ground a fuel tank.It's actually "pink", but I'm only mentioning that so you have reference of the proper colors. If your gauge works, then the tank or...
-
DDennisG01 replied to the thread Anyone remove the helm seat from a 180 Sportsman?.OK, we're on different pages here. Your first post made it sound like this was a project you were definitely going to do. When I do...
-
DDennisG01 replied to the thread Anyone remove the helm seat from a 180 Sportsman?.Not really. You're taking the seat off regardless so it doesn't matter. Besides, it won't fall right off - it would loosen and then...
-
DDennisG01 replied to the thread Anyone remove the helm seat from a 180 Sportsman?.Well... what happens when you try removing the screws? It seems this is probably a pretty easy one to answer for yourself :) I mean...
-
DDennisG01 replied to the thread Need new cabin cushions for 2003 Grady White 2088.This is not a knock against anyone here, but you don't want to trust some unknown guy's measurements. You want to take your own...
-
DDennisG01 replied to the thread Transom Leaking.Good point. If there's no obvious signs of how water could be getting in such as corroded aluminum where the SS screws are, then this...
-
DDennisG01 replied to the thread Steering wheel removal.Yup - all wheels have to have essentially the same "functional" nut holding it on since the steering shafts are standardized.
-
DDennisG01 replied to the thread Steering wheel removal.If it's a pop-off style, tapping it with a rubber mallet (or similar) from the side should start to dislodge it. Obviously, use light...
-
DDennisG01 replied to the thread Sending Unit for Tournament 192.Try contacting KUS and ask them if there's a retailer in Canada. Or check with your local marina or marine store - that, I think...
-
DDennisG01 replied to the thread Transom Leaking.It's a little hard to follow some of your wording, but I think I have the jist of it. Do you use bottom paint with copper in it? That...
-
DDennisG01 replied to the thread Steering wheel removal.If you're vice grips (or slip joint pliers) are large enough... put a thin pad in between the jaws of the pliers and the flats of the...
-
DDennisG01 replied to the thread Steering wheel removal.It looks like it just unscrews? Can't do it with your hand? Try a strap wrench or a rag and a large crescent wrench (it has smooth jaws).
-
DDennisG01 replied to the thread Electrical problem of the day.That's probably a good idea. I mean, if you stuck something else in there, like hot dogs, it probably wouldn't work so well :) :) :)
-
DDennisG01 replied to the thread 94' ish 209 escape access hatch.Oh well. Worth a shot. 30 years is a long time to find a perfectly matching replacement. I replaced my 40 year old ones, though, and...