Ky Grady's latest activity
-
Ky Grady replied to the thread 265 not so fresh water tank.Only thing I use my fresh water tank for is a rinse off after sandbar hopping. Nice to rinse off saltwater. Rest of the time it stays... -
-
There is no need to drink water on a boat this size. It's not like you will be taking weeks long extended trips with no access to land...
-
I had New Wire do my boat switch panel as well. I took their terminations to a terminal block, put ring terminals on the boat side to...
-
Ky Grady replied to the thread Gulfstream 232 vs Journey 258 deck space.Almost equal square footage in the cockpit. Gulfstream has 56 sf and Journey has 55 sf. Gulfstream is the heavier and wider of the 2...
-
As I said before , been decades since I re-pinned molex connectors. In my early life I have done it quite often. You really need the...
-
It may be a little late to suggest this but those Molex connectors might be easy and cheap to get. I did a Google search for 15 pin...
-
Ky Grady replied to the thread My next project!!.Thanks for the Dremel tip. As I'm assembling and putting ends on, I'll be using corrosion guard on all connections, it's messy, but...
-
Same conclusion I came to today. The Molex connectors can't be eliminated on my boat - not enough access. They are available from...
-
Ky Grady replied to the thread My next project!!.After talking with SkunkBoat on the phone, (Thank you), I'm taking a different line of thought. My molex connectors appear to be good on...
-
-
Ky Grady replied to the thread My next project!!.They didn't offer and I didn't ask. That would be a New Wire question.
-
You got me interested! I can't see not going back in with new Molex connectors - assuming they can still get them.
-
Ky Grady replied to the thread My next project!!.Unfortunately no. New Wire disassembled my old panel to use it at a template. I have the wiring diagram in owners manual to go by.
-
Ky Grady replied to the thread My next project!!.All my wires came through the molex, I had no loose ends going to panel. Sent you a PM.
-
Ky Grady replied to the thread My next project!!.Correct. I removed the old panel and unplugged the molex connectors. The new panel is just bare wire ends, no molex. The new panel...
-
-
Ky Grady replied to the thread My next project!!.12 AWG feeding the panel.
