Search results

The "flats area" is forward of the drain plug and about the same distance forward on the hull as the raw water pickups, it is outside of the pickups and is a molded fiberglass indentation with a "flat" area. I installed the high speed fairing in the flats area and get great returns while...

I have a '97 Voyager, it has "transducer flats" on the rear of the hull, that is where my thru-hull transducer is mounted, does the '96 have "tranducer flats"?

The problem I am referring to is the power reduction occurring several minutes after being at cruising speed the engine acted as if the throttle was brought back to neutral if I did nothing the engine would die, If I would retard the throttle the engine would not stall then I could advance the...

I have an Ox66 and last summer I had the same problem, replacing the O2 sensor fixed the problem.

http://www.ebay.com/itm/GRADY-WHITE-RUB ... 2410wt_698

Yep, been running ring free ever since I bought the boat in 2002.

I replaced it, the mechanic said it was in need of replacing since it was the original one and it had never been cleaned before. It was really carboned up.

From SIMs the price of the O2 sensor is around $270 http://www.simyamaha.com/Yamaha_Oxygen_ ... -01-00.htm and I replaced the O2 sensor draw tube as well $37 http://www.simyamaha.com/Yamaha_Oxygen_ ... -00-00.htm and of course you need the O2 sensor gasket kit $18...

I had the same problem, replaced the VST filter and low pressure fuel pumps, problem still occurred, replaced the O2 sensor and now my '97 250 hp 2 stroke efi Yami runs like new....

Check this link I believe they are southco hinges: http://www.southco.com/class/c6-g6-dete ... -7632.html

I'm 6' and I have long arms and big hands!

6 inch as it was the same size as all the others on the boat

Here's a link to the supplier who makes the deck plates for Grady : http://www.beckson.com/dckplt.html

My hoses looked great so I just reused them

I replaced all my scuppers/thru hulls on my '97 Voyager a couple of years ago. To replace the starboard side scuppers I had to install a 6' round access plate in the vertical section below the transom door. With the new access hole I was able to get my hands/tools to enable removal and...

I've got a '97 Voyager it has "Transducer Flats" on the bottom on the hull. I've got a through hull transducer mounted with a high speed fairing block, and I'm getting great returns while running the boat at speed.

If you don't anchor your boat then's no reason for the bow pulpit. Having owned a boat without one, if you archor a lot then you'll want something to keep the anchor line off the gelcoat and rubrail or you'll be damaging both while pulling the anchor up or while at anchor.

I've got a '97 Voyager I bought in '03, I use the boat for diving and I bought a this ladder: http://www.boatladder.com/component/pag ... /Itemid,6/ I had it installed by one of the local boat dealers the Voyager has an metal plate in the transom and 2 of the 4 bolts were tapped into the...

Take the old wiper blade to any auto parts store, get one that matches. Or take the boat into your Grady Dealer have them replace it for you.

I bought my GE Almond kitchen/bath silicone from Lowe's.