Trailer guide poles or bunks ?

Mark DV said:

Ok gotcha. Yes I have a dock and this is how I usually load up my boat but dont powerload.....yet. Do you leave the boat in gear at idle? Like trolling speed? Or with a little more rpms?

Click to expand...

Mark DV said:

Were you able to grab the winch cable and hook to bow eye from the bow?

Click to expand...

leeccoll said:

The only reason that I will keep it in gear while securing the bow is because the boat will roll back down off the rollers if I turn off the engine. I put the boat shift in neutral position first and see if it will stay on the trailer.
If is starts to slip backward, I bump it forward then leave it powered on. The boat will dictate how much force is needed if that makes sense.
On some days the boat will stay put and then I can turn off the motor. Really depends on the dock and angle of the launch.
On a few occasions I have shut down the motor, and as soon as my body weight goes backward, the boat starts to roll too, so I had to scramble and re start the engine, power back on the trailer, and leave it in gear.

Click to expand...

DennisG01 said:

As conditions allow, I try to power load as often as possible. Thunk! Right up to the bow stop. If you're by yourself, leave the engine in gear and either reach over the bow or climb down over the bow to attach the hook.

Question for those of you with the side ladder - which looks very nice, by the way! Whenever I need to hop into the boat from the pavement, I just use the swim ladder. Is there another reason for the side ladder?

Click to expand...

CJ7Rob said:

I do this, but I let out about 4ft of winch cable, so I am able to reach it

Click to expand...