Search results

bringging back an old thread. The search function is quite helpful! I have been replacing hoses all over my 265. it has been a pain in the butt. the scuppers were completed and a couple more for the sanitary System (including the external macerator and Y valve add from this site) to be done...

Seriously? What do you mean or can you point me to a thread as to why and what to replace it with? Now that these hoses were so rotten im doing the head and the fuel hoses. Then will be electrical inclusion new electronics.

Just finished the starboard side on this 60 degree February day. We never get that!!! Here is a pic of the shelf in case someone needs to replace their scupper hoses on a 265.

I failed to take a pic of the new shelf in place before putting the batteries back. This sucks because that’s the part that will help the next guy in the future. I’ll definitely snap the pic on the starboard side.

I was able to complete the port side yesterday. Removed the batteries, cut the existing shelf, replaced the two hoses from the deck drains to the scuppers, replaced the shelf with a new one made out of PVC board and replaced the batterie. Pretty straight forward. The only change that I would...

Also another good idea. Thanks

Thank you very much! This is what I plan to do. Just ordered a bunch of parts so hopefully the dry Saturday request comes through.

I’ll warn you that this is going to be a weird one. My scupper hoses are completely dry rotted On my 265. It appears that the only way to attach to the scupper end is to remove the batteries and the shelf. I am just now ordering parts, doing all of the sanitation hoses too, and trying to...

Awesome!!!

Here are my thoughts. That inlet is really challenging. It could be miles if you follow the markers. I think that the charter captains make their own markers out of milk jugs, bleach bottles, etc and move them as needed. It's tuff in the dark. I trailered my old boat, 31Fountain, to...

I apologize if I was unclear. I don't know the technical terms. The port side of the switch has some resistance to it when you push the tab up or down. The starboard side of the switch has zero resistance. You could move it with a piece of paper. I ordered the switch on ebay and it should...

I just picked up a 2003 265 with 2005 yams 225’s. I had the survey completed and the issues I was willing to deal with. Great hull and motors. Lots of project.

Thank you so much! For some reason this did not come up for me in my search. I just purchased it. The mechanical portion of the switch is broken. Meanin, you can push it up or down but it does not stay. I just purchased the boat but am just getting around to settling priorities. Thanks again!

My new to me 2003 265 has a broken trim tab rocker switch. It appears that the part number is LS3000. Does anyone have one laying around that I could buy? If not, does anyone know the replacement part? I am redoing the helm area so I dont need to match the footprint. The switch is broken...

sorry. 5his is what I plan to do on my 2003 265

https://www.greatgrady.com/threads/groco-pump-simple-macerator-retrofit-265-express.19049/

This is great! the survey on my 2003 265 showed cracking in the sanitation hoses so that’s where I’m going to focus first. I’m pulling the hatches over the fuel tanks because of moisture and will take a look at the hoses but if no cracks, I’m going to push that project out to next winter based...

Thank you all for the suggestions! I just picked up the boat a couple of weeks ago so i have not shrink wrapped it or covered it yet. My last boat i had a custom cover made and it was wonderful. I'll probably do the same in the future. I highly doubt that the fuel lines have been replaced...

Hi, i am going to remove the hatch that covers the aft bilge and the larger hatch that covers the fuel tanks to have repaired. They are holding a ton of moisture. My question is what could I cover the openings with while being repaired? I was thinking of a piece of plywood and a blue tarp. I...

Thanks! Maryland Chesapeake Bay and off shore out of Ocean City MD