Search results

  1. usmm1234

    Digital panel 120 vac meter

    Nice! That’s really the way to do it. My old fashion meter is working good and my Gen set is 5kw so I’m not too worried about amp draw. I ran my AC and water heater at the same time last weekend. No overload. I may upgrade to what you have done this winter.
  2. usmm1234

    Added Large High Flow Blower to Generator Area

    Success! We ran the generator for hours and hours this weekend and we had no vapor locks. I left the New high flow blower running when ever the Gen was running. Then I left it run for 45 minute to an hour after I shut it down. Works like a charm. I think it will keep the whole area dryer too...
  3. usmm1234

    330 Fresh Water problem?

    To each his own. I’ve replaced both pumps, and then replaced the washdown pump a second time to go with a Pro Blaster 4.0. I also changed the tiny diameter hose that a Grady had running from the pump to the washdown hose To 3/4” hose. All thru the small access panel. But I’ve been working full...
  4. usmm1234

    330 Fresh Water problem?

    There’s a small removable panel down in the berth on the port side. You can easily change the pump working thru that hole. I’m the Shurflo pump rep. My original pumps were still working after 8 years, but I put our new pumps in. I used the Shurflo Aqua King standard 3.0gpm for fresh water and...
  5. usmm1234

    Added Large High Flow Blower to Generator Area

    I used the Jabsco 35770-0092 heavy duty 12v blower rated for 10,000 hrs.
  6. usmm1234

    Added Large High Flow Blower to Generator Area

    I did consider a 110v blower. I just felt more at ease using a low voltage unit. I had the extra 12v breaker on the panel right above the other blower switch. Im pumping air out of the space thru the transom. air comes in thru the 2 factory vents by the transom door and all the other openings...
  7. usmm1234

    Added Large High Flow Blower to Generator Area

    I have added a continuous duty high flow 12 volt blower to my generator compartment. This helps to prevent The Gen set from vapor locking. It will also allow the area to get more dry fresh air to prevent corrosion. This thing really moves some air.
  8. usmm1234

    Reading lights 330 Express

    cut the old wire right at the back of the old lamp
  9. usmm1234

    Reading lights 330 Express

    Yes I used those wires. You dont need heavy gauge wire with LED. I just worked carefully and managed.
  10. usmm1234

    Reading lights 330 Express

    I did not remove the piece of wood. I just removed the old lights and put the new ones in the same place.
  11. usmm1234

    Reading lights 330 Express

    I used the Scandvik Lights for readers. I have replaced every single light on the boat with LED’s https://www.greatgrady.com/threads/replacing-all-the-halogen-lights-in-a-330-express-with-led-lights.28340/
  12. usmm1234

    Adding a raw water washdown and live well to my 2009 Grady White 226 Seafarer

    I’m the Shurflo Rep. In 1994 I came up with the idea of the extra port at the base of the livewell pump. We patented it and now license other companies to use it. You only need 1 seacock with the dual port. Shurflo sells Grady all theur livewell pumpS. We have the Piranha, The Bait Sentry and...
  13. usmm1234

    2005 330 Express Air Conditioning Replacement

    I sold marine AC for years. We alway recommended trying to duct the return somehow. Otherwise you will be pulling air from all the closed off areas behind the hull liner. Yuck.
  14. usmm1234

    Adding Genset to Marlin

    I bought my 330 express from a guy that put a new Kohler EKD5 in around Sept 2016. Its constantly giving me issues. It’s fuel injected so it vapor locks constantly. I had the original one of these years ago in my Bertram. There were no electronics and it was carbureted. I never had an issue for...
  15. usmm1234

    2007 330 express repower considering 300 Suzuki

    My numbers are Posted on this blog. I have the DF250AP fly by wire Suzuki’s on my 2002 330 Express. Full of fuel, water, ice etc. I’m cruising at 28 to 29 mph at 1.28 miles per gal At 4650 rpm. At 4850rpm. I’m running 30 mph at 1.2 mpg. I’ve logged about 2000 miles so far on these engines. The...
  16. usmm1234

    2007 330 express repower considering 300 Suzuki

    I doubt that. The only motors that would lower resale would be Honda or Evinrude. Suzuki is the fastest growing outboard line in the Industry for the last 2 years.
  17. usmm1234

    2007 330 express repower considering 300 Suzuki

    I would think that depends on the boat? There are 2 different Suzuki 250’s. I have the DF250AP’s. They are fly by wire and have a bigger displacement then the DF225 or DF250. The DF250AP is an identical motor as the DF300AP. They are just flashed differently. The 250 is rated at 6100 rpm. The...
  18. usmm1234

    Fueling up to go offshore.

    I see the name of your boat is Late Again. We had a boat named The Crack of Noon.