Search results

  1. B

    Cup holder’s ... where to buy ?

    I put these ones in with no issue...Search Amazon though based on how many you need as you can get more for 3 bucks or so a cupholder
  2. B

    E-Box Wind Deflector

    Mine has the same but it doesn’t do much for me to the point that I wear protective glasses when it’s dark out because of the wind. Use a cheap pair from Amazon. This boat was not designed for a 6ft person....when sitting the top metal piece on the window blocks my vision and when standing the...
  3. B

    NJ re Fishing Line

    Thanks for all of the advice. I’ll go with a different approach than I usually do when I tie the rigs and go with a wind-on leader.
  4. B

    NJ re Fishing Line

    Thanks.... So when I make the rigs, I typically put a swivel at the end instead of a loop. I’ve done this since a kid....Is that not a good practice and I should I switch to loops at the end of the rigs? I need to look into a wind-on leader more as I am not too familiar with it. The two...
  5. B

    NJ re Fishing Line

    Circling back to this thread for some more advice. Going to put the mono and braid on a new Penn Battle and Penn Squall 400 LP... Trying to figure out the leader. If I mainly use rigs that have about 24-36in of line, should I bother putting on a leader? I was thinking of having a leader that...
  6. B

    Grady plastic rod holders -

    Bought these for my 2000 and just installed them. There was a thread on SS cup holders where some folks bought a different brand... Amarine Made 2pcs Stainless Steel Cup Drink Holder with Drain Marine Boat Rv Camper...
  7. B

    Electronics 101

    Thanks I thought it was Lowrance and couldn’t find it when I tried yesterday... Below Is the link. Anythingthat starts with EP is what you want. https://m.youtube.com/c/FurunoMarineElectronics/videos?disable_polymer=true&itct=CBQQ8JMBGAEiEwiZndHt7_vuAhVh9MEKHRgPAzY%3D
  8. B

    Grady plastic rod holders -

    Agreed- I need to measure again as I know you said 1-7/8in and I thought my existing ones were 2in or so. Hoping I can find on Amazon to make returns easy if they don’t fit. None of the sites I saw those two products on had the OD.
  9. B

    Grady plastic rod holders -

    Found some other options....The AMarine would fall under the China 316 but their dock cleats have gone over a year in saltwater and still look brand new. Some of us bought their cup holders https://www.anchorexpress.com/Sea-Dog-Stainless-Steel-Side-Mount-Rod-Holder--325150-1_p_83650.html...
  10. B

    Grady plastic rod holders -

    Beautiful job, makes sense now knowing you did that as a custom job. Looks perfect Regarding the 316, how important is the 316 vs the other SS grades? Reason I ask is that I went nuts looking for 316 on a lot of the work I did this winter. When I removed the original scupper hoses on my 20...
  11. B

    Grady plastic rod holders -

    Don’t think you will need to. My hole is on the bottom of the holder in the back. If you remove the highlighted fastener, you could reuse that hole. That’s what I have been thinking about doing but have not yet pulled the trigger. Going to try without first
  12. B

    Grady plastic rod holders -

    I’m interested as well in the stainless...Curious where he got from Saw this on Amazon. The clip isn’t welded on so should be able to slide through if the diameter fits. Not sure what the fastener is at the bottom but I was thinking of popping that out and using the hole to fasten to the...
  13. B

    Electronics 101

    Take a look at those Lowrance videos where they compare their units to other unbranded MFDs....helps you learn about all of the features and how others perform.
  14. B

    2021 Adventure 208 Build

    How does the carpet hold up to stains? Does it just wash away?
  15. B

    Grady plastic rod holders -

    Anybody try without the rod holders?? I’m debating on it and curious if there are any unforeseen issues. The two racks seem far enough apart to support the rods
  16. B

    flush mount material

    Agree....I was on the fence thinking 1/4 too thin and 1/2 too thick after seeing in person. So I went with the 3/8 starboard but think you may be able to get away with less if acrylic
  17. B

    GW Delivery Delays?

    Curious if these challenges also result in more quality defects, especially if there are continuity concerns with the labor
  18. B

    PartsVu As A Vendor - Are they reliable?

    Yes....But I’ve only bought RingFree from them as their prices are better than I’ve seen elsewhere ...
  19. B

    Opinions- New enclosure GradyBlue or OffWhite?

    I like the darker colors. Every time I see those cream colors, I wonder how they look up close and how much more obvious stains are on them vs the darker colors.
  20. B

    flush mount material

    Depending on where you are located, try TAP Plastics. I had them ship across the country and was only $37 with routing and rounded edges. They finished the front so I just focused on the back and cutouts. They would do everything but I had no clue all of the dimensions at the time. Next time...