Search results

  1. NCFreedom

    215 Freedom Engine Height Adjustment

    I am posting my journey on this experiment to help others that may be experiencing similar engine mounting height issues due to additional weight being added to their boat. I have 5 group 31 batteries in the stern of my boat and a 36V 72” shaft trolling motor on the bow. I have added 8 stainless...
  2. NCFreedom

    2017 Yamaha F250XB Lower Motor Mount Bolt Badly Rusted

    My 2017 Yamaha F250XB on my 2018 215 Freedom has an extremely rusted lower motor mount bolt on the port side. This is the side with the ground wire attached to this bolt. The factory installed this bolt in a direction to where you cannot easily remove this 227mm long bolt. My plan is to cut the...
  3. NCFreedom

    2018 Freedom 215 Modifications

    I bought my 2018 215 Freedom in August of 2019 from the original owner. Here is a list of modifications I have done so far. These are just things that I have done to my boat to suit my needs, so you can leave positive comments, and any questions you might have. I installed a 36V Minn-Kota...
  4. NCFreedom

    Use Fresh Water System To Flush Outboard

    I just wanted to share what I did to flush my outboard as soon as I pull the boat out of salt water while the engine is still hot. I sometimes fish 45 minutes away from the house, so I wanted a way to immediately flush the outboard with fresh water and Salt Away. I have used this setup several...
  5. NCFreedom

    2018 Freedom 215 Gel Coat Chipping Off

    I was just wondering if anyone else has seen the gel coat chipping where the two colors meet on the side of the hull. Did Grady-White or the dealer warranty the repair? I am the second owner, so I am hoping they will fix this under warranty, but I am not sure.
  6. NCFreedom

    Engine Flush Port Quick Connect Fittings CPC

    I could not find an older post I saw to update, so I am starting a new post about the quick connect fittings for the engine flush port in the engine well. The company that makes these quick connect fittings is CPC (Colder Products Company) I know the male coupling fitting that screws on to a...
  7. NCFreedom

    2018 215 Freedom Gas Fill Problem

    I am new to the Grady White family, but I have a 2018 Freedom 215, and I was wondering if anyone else has an issue with the gas nozzle cutting off A LOT when filling the gas tank? The boat is on the trailer at the gas station. The fuel tank vent comes out of the side of the hull below the rub...