Not sure if there are any threads on this yet but was curious if anyone has removed the bow pulpit on a 2004 283 Release and replaced it with something shorter? I want to keep the windlass but want to put a shorter pulpit. Would to convert to the though the hull windlass but I’m sure that’s big money. Any ideas
2004 283 Release pulpit reconstruction
- Thread starter ma6233
- Start date
PointedRose
Well-Known Member
- Joined
- Feb 11, 2021
- Messages
- 646
- Reaction score
- 196
- Points
- 43
- Location
- San Francisco
- Model
- Overnighter
There are lots of threads on pulpit repairs. You can likely make a mold and fabricate it how you want it.
@seasick shared some vids recently
www.greatgrady.com
@seasick shared some vids recently
Hatch mold
I know some of you like this kinda stuff. My son and I have been working on a project together. We are building some hatches and gutter molds currently. I'll try to throw some pics in as we go. This will be a 3/4" hatch with 1/2" honeycomb. Hinges and slam latch recessed. -1.5oz csm -1708...
www.greatgrady.com
If you install a shorter pulpit, would the anchor now hit the bow keel?
And... what exactly are you trying to say here? Ever heard of proof reading before clicking submit?
And... what exactly are you trying to say here? Ever heard of proof reading before clicking submit?
Hookup1
GreatGrady Captain
- Joined
- Oct 16, 2007
- Messages
- 2,602
- Reaction score
- 714
- Points
- 113
- Age
- 69
- Location
- Cape May, NJ
- Model
- Islander
Not sure what you are trying to accomplish. How much shorter?
I just installed a Five Ocean's pivoting anchor roller on my 268 Islander. I cut a slot about 3" x 3" out of the pulpit so the roller could be set back. I then did the glass work to repair it. Waiting on paint now. My pulpit is cored with some pourable filler - no wood. It's rock hard but can be cut and sanded.
www.five-oceans.com
I just installed a Five Ocean's pivoting anchor roller on my 268 Islander. I cut a slot about 3" x 3" out of the pulpit so the roller could be set back. I then did the glass work to repair it. Waiting on paint now. My pulpit is cored with some pourable filler - no wood. It's rock hard but can be cut and sanded.
Anchor Hinged / Pivoting Self-launching Bow Roller with Delrin Rollers, Length 16-1/4 inches (413mm), AISI 316 Stainless Steel, FO-4184
Product Video: Five Oceans Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat's finish. Not only that but they provide a secure place to store your anchor when used in conjunction with an optional chain...
www.five-oceans.com