Latest activity
-
DDennisG01 replied to the thread Yamaha F-150 lower unit.Is the one that SEI shows on their website not correct? I'd maybe contact them directly if you need more info/clarification.
-
You are now experiencing what I did before I bought new df200s. While my low hour f150s could have gone another thousand hours, I could... -
i know what im going to refer to is 9 years old, but bear with me... how in the world would 150 lbs of ballast even come close to...
-
Ffamily affair replied to the thread Yamaha F-150 lower unit.That stinks. I searched THT for you too. Nothing there.
-
Ekea replied to the thread Yamaha F-150 lower unit.no personal experience with SEI, but i have heard that a small percentage are junk off the bat, but most run for a long time. -
Hookup1 replied to the thread Yamaha F-150 lower unit.It's complicated by being a counter-rotation lower unit. The last lower unit I melted down was filled with water and started making... -
FreedomCrawler replied to the thread New Boat Questions - The basics.Impeller kit arrived and will work on that this weekend. Oil pressure sensor won’t arrive until Monday though so I’ll try and keep... -
DDennisG01 replied to the thread Marlin 300 Rod Holders Up Front.Good point. Unless they will end up draining to an area that, itself, drains. BUT... I just realized we're talking about a Marlin...
-
Ffamily affair replied to the thread Yamaha F-150 lower unit.I didn't realize how cheap the SEIs are. I'd be willing to take my chances at that price point for my needs.
-
Billv replied to the thread Yamaha F-150 lower unit.I’ve used SEI for an I/O and it Worked great for many years -
Lloubeer replied to the thread Marlin 300 Rod Holders Up Front.If you do it, where will the water go that goes down the rod holder? You'll need a sealed rod holder with drain lines.
-
Ffamily affair replied to the thread Yamaha F-150 lower unit.You are now experiencing what I did before I bought new df200s. While my low hour f150s could have gone another thousand hours, I could...
-
Hookup1 replied to the thread Yamaha F-150 lower unit.I’m learning that repairing a lower unit isn’t always an option. Half the time you can’t get the bearing carrier out of the housing...
-
Ekea replied to the thread 375 Freedom Issue / Question.i know what im going to refer to is 9 years old, but bear with me... how in the world would 150 lbs of ballast even come close to...
-
DDennisG01 replied to the thread Marlin 300 Rod Holders Up Front.Drilling holes, understandably, can be a daunting task. But honestly, once you've done it a bunch of times, it's an every day thing...
