99' Tournament-Replaced Accessory Panel-only 3 circuits?

[markb8608]

Hello All
I just replaced the original accessory panel with a Blue Sea ST Fuse Block. After replacing the panel, I started scratching my head. The original panel only had three circuits. (1) Red/orange 10amp labeled as cabin lights (2) orange stripe 20 amp labeled (maybe 10 gauge) as wiper and (3) red (light gauge maybe 14gauge) labeled as accessory power.

I added 3 other circuits myself for fish finder, radio and GPS. The bilge pump has a fusable link.

How is it that Grady only installed three circuits? I am pretty sure the original owner never touched/replaced the panel. The original gauges were all analog.

Does anyone have any thoughts? Much appreciated.
Mark

 

[BobP]

At the switch panel, does the panele have the button breakers (under the little rubber boot)?

Are any of the switches spare?

 

[markb8608]

switches have little rubber, flexible covers

Hi
Each of the toggle switches has a black rubber like finger-cot like " cover" directly below the switch itself.
I have pushed several but it does not feel like they have anything under them
Mark

 

[BobP]

Those are breakers in untripped position.

If any switches are spare then you have more spares including breakers/switches to use to turn on and off, if preferred.

Use breakers for motor loads if you have any, fuses for other things.