Trim Tabs

wlewis

Well-Known Member
Joined
Jun 19, 2008
Messages
266
Reaction score
13
Points
18
Location
Savannah, Ga
I just launched my 225 after being set up for Winter and noticed my Bennett Trim Tabs that automatically reset to neutral position when turning on the battery, work fine when running, but no longer reset when turning on battery. Anyone have any suggestions as to what’s gone wrong?
 

wlewis

Well-Known Member
Joined
Jun 19, 2008
Messages
266
Reaction score
13
Points
18
Location
Savannah, Ga
Thanks for that thought. Could very well be. I don’t claim to have the best memory. Also, I noticed reading Bennet info, there is an “Auto Tab Retractor”, a small box that is wired into the installation. I just looked under the console and if it’s there, it’s buried behind a bulkhead and no telling what else it’s under. May not be worth the effort. Will certainly try turning on ignition and see if resets.
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
7,981
Reaction score
1,270
Points
113
They retract when the power is removed, so they are fully seated to the hull once power is removed. Sound like yours are working fine!
 

DennisG01

GreatGrady Captain
Joined
Sep 1, 2013
Messages
7,118
Reaction score
1,312
Points
113
Location
Allentown, PA & Friendship, ME
Model
Offshore
Thanks for that thought. Could very well be. I don’t claim to have the best memory. Also, I noticed reading Bennet info, there is an “Auto Tab Retractor”, a small box that is wired into the installation. I just looked under the console and if it’s there, it’s buried behind a bulkhead and no telling what else it’s under. May not be worth the effort. Will certainly try turning on ignition and see if resets.
Yes, in order for them to retract on their own, that ATR would have had to have been installed. They won't retract on their own without that 'add-on".
 

wlewis

Well-Known Member
Joined
Jun 19, 2008
Messages
266
Reaction score
13
Points
18
Location
Savannah, Ga
Dennis, you’re right. Just tried turning on ignition, adjusting tabs beyond neutral position, and turned off ignition and they retracted. I guess I just need to use my boat more! Thanks Dennis.