Search results

Just went out today for pricing on repowering my Gulfstream this spring. Twin e-tecs, complete rigging including upgrading to digital gauges,( no installation fee included in price since I will be installing), just north of $25,000. I would also have to say $39,000 sounds outrageous.

Just wondering if anyone has repowered with the e-tec 135s. Talking with the rep I was told that a pair of these would be an equal replacement to my existing Yamaha 150 2 strokes since these e-tecs produce 148 HP. Weight is about the same (418lb) , cost about 2000.00 less than e-tec 150. My...

Hi Jeff, Just replaced the switch panel on my 1990 Gulfstream. I had Niemiec Marine in New Bedford make the panel, bought the switches and wired myself. I don't know if they would do the whole job or not but I was pretty pleased with panel. Used contura rocker switches and seperate Blue sea fuse...

Called Scott Friday, got the machine saying he was in the process of moving his shop and it would be a week or so before he was up and running again. I also sent him dimensions for a switch panel replacement on my Gulfstream last week, hopefully we'll hear from him this week.

Thanks for the info gw204. Have a great Christmas!

Hi all, I'm recoring the deck hatch on my 90 Gulfstream and looking for some advise, so far hatch has been removed, plywood blocks removed and skin sanded to eliminate any high spots.I purchased 1/2" marine grade ply and plan to make a one piece solid core rather than multipal blocks. Question...

Hardways, Replaced main fuel tank last year on my gulfstream. I used a company right out by you called Alloy Metal Works in Farmingdale NY 631-694-8163. Phil had all the correct Grady dimensions, used .125" alu wall, baffeled, sending unit, pressure tested etc. Had no problems at all and he...

Hi All, I'm going to be replacing those copper steering lines with new teleflex hose( thru the tramsom). Question is the length. I think 24' will work ok, but would like to hear from someone who has done this job before just to be sure. Boat is a 1990,232 Gulfstream with bracket. Thanks

exudedude, I have a 1990 Gulfstream, just replaced all the thru hulls last year. The sink drain fitting was located to the left of the sink about in line with the bulkhead. To access this I believe I removed the bulkhead to the left of the cabin door. Not a bad job at all. If there further...

Hi All, I'd like to replace the helm seat cushions on my 90 Gulfstream but I'm not sure who made those seats for that year. Any advice would be greatly appreciated.

I also use acetone to clean, followed up with penetrol, came out great. Armerol may dry and crack in direct sunlight.

Pete, Just ran into the same problem, Dremmel tool was the answer, took about 5-10 min. to remove.

Talked to Grady dealer and had them fax me info on 1990 gulfstream thru hull replacement with stainless, here are the results. 4- 1 1/2" (Scuppers) long thread $35.12 each 2- 1" (sink/icebox) (fishbox) reg thread $17.52 each 2- 1 1/2"...

Robby, I am replacing all thru hulls above and below waterline with stainless. No macerator and I only have 2 transom scupper drains.I think your right with the 1 1/2" drain for the livewell and all the rest appear to be the same size (1")...

Hi All, Getting ready to take on that awful task of replacing all the thru hulls including the scuppers on my 1990 gulfstream. I would like to have all these on hand when the cover is removed but not sure of the sizes. Can anyone tell me exactly what sizes are needed and where they can be purchased?

Thanks for all the replies. I have tried a few Plexiglas fabricators, thickness seems to be an issue. McMaster Carr I never thought of and since these are straight panels there's a pretty good chance they might have it. All panels will be changed so color match should not be an issue. Thanks...

Hi all.... I'm trying too locate some black Plexiglas Grady used for compartment doors on my 1990 232. Does anyone have any information where this material can be purchased?

Re: Updated Member List 10/28/05

Re: Updated Member List 10/28/05