Recent content by AquaHunter

  1. A

    90’ Grady White Overnighter project

    I matched the Grady paint on the fiberglass, on the motor I went with Performance White
  2. A

    90’ Grady White Overnighter project

    Came out pretty good
  3. A

    90’ Grady White Overnighter project

    I saw someone with a white Yamaha outboard with a custom decal so I had to do it because it really look cool, off to the body shop!
  4. A

    90’ Grady White Overnighter project

    I bought 2001 225 hp Yamaha Saltwater Series II fuel injected pretty cheap with harness, control, prop and it was 120-125 psi compression
  5. A

    90’ Grady White Overnighter project

    I closed up with a beefy 3/4” marine plywood and fiberglassedthe inner area, closed up the side vent and did the deck/engine bay area
  6. A

    90’ Grady White Overnighter project

    Found the damage was only around the old Volvo transom, so I made a cut out and used “peanut butter” and fiberglass
  7. A

    90’ Grady White Overnighter project

    Then I started to disassemble most things and found termite damage to the transom
  8. A

    90’ Grady White Overnighter project

    I got to work on the engine and transom mount removal
  9. A

    90’ Grady White Overnighter project

    Hi everyone, I’m new here and from South California, I started my project last year and had fun with it, I did the inboard to outboard conversion. The boat was given to me in exchange for some motor work from someone. So it came with a 4.3 block with a rod thru it and no outdrive.