Recent content by BabyG

I see too many boats with useless kickers. I use mine to troll, I can adjust from 1 knot to 0.8 knots with easy great for fluking. It also got me home from 33 miles out once. 23 Gulfstream 25hp kicker 4 stroke yammi

DO IT DO IT but do it in a small glass jar first, LOL you won't do it in your boat.

http://www.garysupholstery.com/marine-upholstery.html Did mine got the stuff from them. Found them very helpful.

Show the wife the little rubber bumper stop that is under the latch going into the cabin on the Grady and explain the attention to detail of GW to the other boat. Thats what gets my friends and to be fare I like the Hydre Sports.

I also have the 93 Gulfstream and got new canvas from them this winter. The 40 ml is awesome only problem was the port side was a little short I had to send them my old one so it is my old ones they are using for a template. I would recommend to tell them to add 1 inch to the length on the port...

Midnightrider I think your problem came about cause you had non treated gas sitting in the tank. So the boat sat for three months no big deal but when was that gas put in the tank? also you said tanks= 2, and you put in 80 gal? how are your tanks diveded? I have a gulf mine are 90 gal and a...

I did my 50 gal aux. this year, Go to auto store get a gas fuel pump and some 3/8 hose, hook up a non sparking on and off switch. Disconnect the hose before the fuel water filter and hook up the hose attach pump to your battery and start pumping, any dripping of fuel or strong smell of gas STOP...

My friend is selling a 27 here on long island with a diesel. Very nice boat gets 8gph at about 24 knots

WOW nice wonder if they will go back to Evenrude

I am looking forward to a nice cruse on saturday tomorrow in the snow maybe even put on some Christmas lights.

They have most GW boat patterns because they are the ones who made them originally. Except mine which they lost in a storm so I had to sent them mine. I had them make new one's canvas and windows came to $750, two front panels and the two sides.

I had the same idea with my Gulfstream I was going to put in plexy glass but went with new canvas and a really thick eisenglas. New windows are so stiff you almost don't have to use the snaps. SO clear they are more easy to look through that the windshield below it. I used the place I found here...

Just replace the snap. You have to drill out the center of the old one. Kits are at west marine.

its the bottom hole on the engine

Good info, sorry I can not really add to much. 250 E-tec top hole on bracket WOT 5500 rpm 30.7 knots 150 gal 2 people and a lot of gear. prop 17 ? do not know the size exactly.