Blaugrana's latest activity

  • B
    I put these ones in with no issue...Search Amazon though based on how many you need as you can get more for 3 bucks or so a cupholder
  • B
    Blaugrana replied to the thread E-Box Wind Deflector.
    Mine has the same but it doesn’t do much for me to the point that I wear protective glasses when it’s dark out because of the wind. Use...
  • B
    Blaugrana replied to the thread NJ re Fishing Line.
    Thanks for all of the advice. I’ll go with a different approach than I usually do when I tie the rigs and go with a wind-on leader.
  • B
    Blaugrana reacted to SkunkBoat's post in the thread NJ re Fishing Line with Like Like.
    So... tying a swivel to braid is easy with a Palomar...unless there is a rig already attached to the swivel. When tying a Palomar, the...
  • B
    Blaugrana replied to the thread NJ re Fishing Line.
    Thanks.... So when I make the rigs, I typically put a swivel at the end instead of a loop. I’ve done this since a kid....Is that not a...
  • B
    Blaugrana reacted to Ky Grady's post in the thread Cooler lid pads with Like Like.
    Having a couple of SeaDek cooler lid pads done for my coolers. I think these will be nice. Just got the layout proof from the company...
  • B
    Blaugrana replied to the thread NJ re Fishing Line.
    Circling back to this thread for some more advice. Going to put the mono and braid on a new Penn Battle and Penn Squall 400 LP...
  • B
    Blaugrana reacted to BrooklynJoe's post in the thread flush mount material with Like Like.
    I used 3/16 acrylic to match the thickness of the original doors. This way I could reuse the enclosure for storage. Works good for my...
  • B
    Blaugrana replied to the thread Grady plastic rod holders -.
    Bought these for my 2000 and just installed them. There was a thread on SS cup holders where some folks bought a different brand...
  • B
    Blaugrana reacted to SkunkBoat's post in the thread 265 X - flat panel dash with Like Like.
    It was almost warm enough to go out and make a template... my feet are cold.... I have 1/4" black plexi for the finish panel. The...
  • B
    Blaugrana replied to the thread Electronics 101.
    Thanks I thought it was Lowrance and couldn’t find it when I tried yesterday... Below Is the link. Anythingthat starts with EP is what...
  • B
    Blaugrana replied to the thread Grady plastic rod holders -.
    Agreed- I need to measure again as I know you said 1-7/8in and I thought my existing ones were 2in or so. Hoping I can find on Amazon...
  • B
    Blaugrana replied to the thread Grady plastic rod holders -.
    Found some other options....The AMarine would fall under the China 316 but their dock cleats have gone over a year in saltwater and...
  • B
    Blaugrana replied to the thread Grady plastic rod holders -.
    Beautiful job, makes sense now knowing you did that as a custom job. Looks perfect Regarding the 316, how important is the 316 vs the...
  • B
    Blaugrana replied to the thread Grady plastic rod holders -.
    Don’t think you will need to. My hole is on the bottom of the holder in the back. If you remove the highlighted fastener, you could...
    • A1A03015-2B6E-4F2B-944F-680F40DA1CE7.jpeg
    • A43B3F69-BA04-4191-8A08-DC267FCDC8C6.jpeg