DennisG01's latest activity
-
DDennisG01 replied to the thread 24 Offshore Winch Hook Loose.It's been a while, but... I either went through the small access hole that is in that forward bulkhead in the cabin or.... more then...
-
DDennisG01 replied to the thread 24 Offshore Winch Hook Loose.The Offshore does not have an anchor locker - at least not in the early years. I'm not sure if anything was changed later in the...
-
DDennisG01 replied to the thread 24 Offshore Winch Hook Loose.It's actually rather easy to access. I did it on my own Offshore. You NEED to check the condition of the bracket that connects the bow...
-
DDennisG01 replied to the thread 1995 Sailfish 272 Repower. Suzuki 200 or 225??.There's not much else we can say - its the going to be the same thing over and over and over, you know? If you can't make the decision...
-
DDennisG01 replied to the thread 1995 Sailfish 272 Repower. Suzuki 200 or 225??.I think that question is one only you can answer. IS FBW nicer? Oh my gosh, yes! Every aspect of usability is nicer and easier. The...
-
DDennisG01 replied to the thread Hull Paint / Thru Hull Fittings?.Yes, it would be silly to go to all of the trouble of removing/reinstalling them when 90 seconds of taping does the job... and...
-
DDennisG01 replied to the thread Trim tabs getting damaged when forklift lifts boat.The downward wings give better performance for the size of the tab. I wonder if something has been messed with at some time because one...
-
DDennisG01 replied to the thread Gulfstream 232 W/ Single Yamaha 250 4S.Another easy method is to just physically measure the diameter with one of those things that has graduations on it and tells you the...
-
DDennisG01 replied to the thread Gulfstream 232 W/ Single Yamaha 250 4S.So that's a Yamaha prop - which is good. But that parts only tells you that it's a 17". To see the diameter, you have to look at the...
-
DDennisG01 replied to the thread 265 Express Rub Rail End Caps....Oof - that's not nice -- of Grady to do that! I guess, no matter what you end up with, fill that hole with some good goop? Yeah, I...
-
DDennisG01 replied to the thread LIQUID CLEANER TRAPPED IN HULL.This is not a new issue or one that is specific to 235's. Pretty much all Grady's have a forward bilge that is slightly lower than the...
-
DDennisG01 replied to the thread 265 Express Rub Rail End Caps....Do you "need" the extension? From the picture, it doesn't look like you really need it. It seems like that's just a thing that is...
-
DDennisG01 replied to the thread 265 Express Rub Rail End Caps....Too Tall - did info provided above give you something that would work? Barbour Plastics is another source to check into. You might be...