DennisG01's latest activity
-
DDennisG01 replied to the thread Correct prop for 228 Seafarer with F225 Yamaha?.Steve, something sounds amiss - like maybe something else is going on. Also, I believe you're thinking of prop pitch backwards...
-
DDennisG01 replied to the thread Pulling tube and rope hitting the motors.Sounds like a Turbo Swing (or similiar) that we referenced above?
-
DDennisG01 replied to the thread Pulling tube and rope hitting the motors.I understand where your mind is on this. Maybe jsut hook it all up and try it, first? You can just do it while still on the trailer as...
-
DDennisG01 replied to the thread helm chair.The seat base looks like fiberglass? I believe the seatback is HDPE, right? That's going to be really tough to get paint to stick to...
-
DDennisG01 replied to the thread helm chair.Before you spray - maybe try cleaning better? I've sprayed plastic parts with good results, but if you can clean it, that's a better...
-
DDennisG01 replied to the thread Bulkhead replacement.Oh, that's totally different. It originally sounded like you were replacing the structural bulkheads below the floor. That changes...
-
DDennisG01 replied to the thread Bulkhead replacement.Sure. But another line of thinking is that if you do a good job with marine ply, it will likely last longer than the stuff that is in...
-
DDennisG01 replied to the thread 1992 GW Seafarer 22 Trim Tab Instalation.Good pic, thanks. Yup, that's a very normal hull. Mount it just inboard of the outer strake. I know Bennett has good directions - it...
-
DDennisG01 replied to the thread 1992 GW Seafarer 22 Trim Tab Instalation.What's different about the transom? Post a picture? I've done countless numbers of these - typically just follow the manufacturer's...
-
DDennisG01 replied to the thread New Canvas - what to do.OK, so SG is basically the same as normal isingglass - but better with a special coating, too. BE CAREFUL with cleaning - use only...
-
DDennisG01 replied to the thread New Canvas - what to do.One way that I've done... I rolled them (with sheets in between) around a 4" PVC drain pipe (ligher than Sch 40) and then stored all (8)...
-
DDennisG01 replied to the thread Are wing windows interchangeable?.Good question, I can't imagine why the glass, itself, would be any different. But I've never tried to find out! Have you checked with...
-
DDennisG01 replied to the thread 1990 seafarer gaskets.Oh... part of the reason for the clay was to also find the space between the lid and the box so I knew what thickness foam to get. What...
-
DDennisG01 replied to the thread Trailer for 306.In case somebody has a trailer that might work, it would probably be more helpful to list the specs you need. The important things on...
-
DDennisG01 replied to the thread 1990 seafarer gaskets.It's been probably 4 or 5 years since I did this "mod" :rolleyes: But I don't recall using anything too special. If I recall, I did...