DennisG01's latest activity
-
DDennisG01 replied to the thread Fuel level measurement.Yes, standard ohms here in the States is 33 to 240 - that's been the standard for decades and hasn't changed. 33 for full and 240...
-
DDennisG01 replied to the thread 2000 Grady White 192 Tournament.Hmmmm... maybe I can put a piano hinge on the plexiglass.....
-
DDennisG01 replied to the thread 2000 Grady White 192 Tournament.If you figure it out, let me know. Been searching for 4 years for my mother's 2000 192. There are some salvage companies out there -...
-
DDennisG01 replied to the thread Gauge Identification.Yeah, it would be obvious as the cutout for the engine and dog box would be wider than normal hatches down the center of the boat. Oh...
-
DDennisG01 replied to the thread Gauge Identification.I'm not saying it is... but being on a bracket "could" mean it was originally a stern drive. But you know your boat better than me! :)...
-
DDennisG01 replied to the thread Gauge Identification.Take the vac hose off the gauge - does water come out? Take the vac hose off at both ends... does it old pressure or vacuum? Is the...
-
DDennisG01 replied to the thread Gauge Identification.So the OB is NOT on a bracket?
-
DDennisG01 replied to the thread Gauge Identification.Those gauges look a lot older than 2005 - are they original to boat? Did the boat originally have a stern drive? Does that small...
-
DDennisG01 replied to the thread Gauge Identification.That's a water pressure gauge.
-
DDennisG01 replied to the thread New Grady Paint Color.Is your boat currently painted - or gelcoat? "Classic" color would be white - which is not paint. I've done some small boats and used...
-
DDennisG01 replied to the thread 305 Listing.Got any water in the aft or mid bilge?
-
DDennisG01 replied to the thread Replacement of small pin.Who makes the seat? You can try reaching out to that company. The picture is fuzzy and doesn't show much detail - nor is there a...
-
DDennisG01 replied to the thread Fuel level measurement.With the boat level, you can remove the fuel sender and simply "dip" the tank to physically check the level as you asked. If it's a...
-
DDennisG01 replied to the thread Scupper hoses.It's probably chrome over BRONZE. While they might start pitting and look ugly, bronze is the best material to have in terms of...
-
DDennisG01 replied to the thread Scupper hoses.You must have really good access for that one - I was imagining trying to stretch your arm into 18 different positions and angles while...