DennisG01's latest activity

  • D
    DennisG01 replied to the thread Armstrong Bracket Bolt Corrosion Fix Ideas.
    Since it's minimal right now... get it taken care of before it requires a lot more work. You should be able to take two bolts (1&3...
  • D
    DennisG01 replied to the thread Prop Diameter.
    Yup - issue FOUND! There's not bracket on that boat so the anti-vent plate should pretty much be even with the keel or less than an...
  • D
    DennisG01 replied to the thread Prop Diameter.
    Hmmm... well that new info, it puts doubt on a slipping hub. But then... it depends on how heavy he is and how hard on the throttle...
  • D
    DennisG01 replied to the thread Prop Diameter.
    I'll check my mother's for a comparison - she has the same boat/engine. BUT... you may very well simply have an old hub that is...
  • D
    DennisG01 replied to the thread Holding Tank Discharges Without Turning On Macerator.
    Wouldn't have two vac pumps. See my post above about these pumps and differences. If he does have overboard discharge, that's likely...
  • D
    DennisG01 replied to the thread Ski Pylon.
    Good deal. Wakeboarding is fine from these pylongs, for sure. It's the tubing that can put a MUCH larger stress on the pylon. Some...
  • D
    DennisG01 replied to the thread Ski Pylon.
    If you've only emailed, call a dealer directly - that's an easy thing to get a price on. Or call another dealer. Do you want to ski or...
  • D
    DennisG01 replied to the thread Replacement Cleat 1994 232G.
    Oh, German, I meant ask... what does the cleat actually look like? Is it a standard looking, 4-bolt open-base type cleat? I'm assuming...
  • D
    DennisG01 replied to the thread Engine Flush Adapter no longer sold by Grady.
    Davis, that part is a "valved", not a pressure reducing valve. Valved means "one way". There's no reason to limit garden hose...
  • D
    DennisG01 replied to the thread Replacement Cleat 1994 232G.
    Oh, I see. Were you able to find an exact replacement? If so, that's a GOOD find! :) If not, and you're intent on perfectly matching...
  • D
    DennisG01 replied to the thread Transducer stern block 2014 Freedom 285.
    If I am summing up correctly, the question is... "My transducer stern block came loose, what should I do?" Meaning, the parts about...
  • D
    DennisG01 replied to the thread Replacement Cleat 1994 232G.
    There's no "correct" placement in the sense that there is only one specific place they must go. Put them where it works best for you -...
  • D
    DennisG01 replied to the thread Marlin Battery charger.
    Couldn't tell you for sure, but it's easy enough to figure out by just looking at things. A charger is either hooked direct to the...
  • D
    DennisG01 replied to the thread Wiring/Fuse Question - 2018 Freedom 235.
    Those two items will not be protected by a common fuse. If the box on your boat isn't labelled, and there isn't specific info in your...
  • D
    DennisG01 replied to the thread 216 sound system.
    You're probably right - I was just curious since it wasn't mentioned and I don't actually know.
Show older items