dogdoc's latest activity
-
dogdoc replied to the thread welding hardtop support.i went through all support mounts to be sure were tight -
dogdoc replied to the thread AutoPilot upgrade from manual hydraulic.I stand corrected, it seems installing one auto pilot does not an expert make. From Garmin Reactor 40/shadow drive install Fuse: 40 A...
-
dogdoc replied to the thread AutoPilot upgrade from manual hydraulic.no need to go to the battery with either. mine is powered from pos and neg buss low at the helm, those buss are fed directly from the...
-
dogdoc replied to the thread welding hardtop support.we talked about that at the shop
-
dogdoc replied to the thread 280 Marlin speed and fuel economy with 4 strokes.Got the props on but no chance to run, bad weather. Would have had to pull props anyway as the day before I got an outrigger line in...
-
dogdoc replied to the thread welding hardtop support.Spoke to welder/fabricator (beautiful shop) very near by. I have to bring boat to him, his welding truck must be near the job and so...
-
dogdoc replied to the thread AutoPilot upgrade from manual hydraulic.do not have it on my raymarine ev150, not an option. could not justify the expense, (garmin)to get it
-
dogdoc replied to the thread welding hardtop support.I have heard stories of frying electronics from welding current. Is that a real problem?
-
Looks like I have a second weld in my hardtop support tubing that is breaking. The first came with the boat, the second seems to have...
-
dogdoc replied to the thread 280 Marlin speed and fuel economy with 4 strokes.follow up to come asap
-
dogdoc replied to the thread 280 Marlin speed and fuel economy with 4 strokes.looks like i am gonna try 3x16x18.5. book says i should get 600rpm and better fuel economy
-
dogdoc replied to the thread 280 Marlin speed and fuel economy with 4 strokes.3 blade spec is 55-6100k rpm
-
dogdoc replied to the thread 280 Marlin speed and fuel economy with 4 strokes.So after 100 hrs I am thinking that I am just not getting enough rpm at WOT. Seems like no matter what conditions or load the best I...
-
dogdoc replied to the thread Suzuki DF200AP maintenance tips.same 3 holes on mine, will look at it again in 100 hrs
-
dogdoc replied to the thread Suzuki DF200AP maintenance tips.did my 100hr yesterday on trailer from another post (no problems with trailer). question can you add gear lube in the top vent hole and...