Recent content by HaulinBass

Thanks Thanks for all of the input. I replaced the battery and it's fine.

First of all the boat is a 24 Offshore with twin Johnson's, 150's. I went to start the boat using battery one, I should also mention the boat has 2 batteries and two battery switches, one motor started and one had nothing, switched 2nd motor to battery 2 and it fired right up. I thought maybe...

Does any one know what would cause a high voltage reading? I have a 2 battery set up and when I switch on the one battery my gauge spiked and my GPS gave me a high voltage warning. Could it be just a bad battery? Thanks in advance.

The plates on my bracket were hitting my motors so I cut them off over 2 years ago, did not notice a thing. Sawzaw with a good metal blade took 5 minutes. Don't forget to file the edges down so no one gets hurt around the swim platform.

24 Offshore I have a 1988 Offshore with 2 150hp Johnsons on a bracket and my buddy has an 1985 24 Offshore with a single 200HO E-Tec. The boats are almost identical as far hole shot and top speeds, so I think that the set up you are considering should move out just fine. The hull like all...

Grog, I like the teak idea, I will look into and let you know how I make out. As far as the one on ebay, nightides is right, way to long. Thank for the input.

Does anyone know where I can find a bow pulpit for a 1988 24' Offshore? I have one on the boat that is pretty beat up. Thanks in advance.

Thanks for your help!

Trying to find out if anyone knows what kind of switch is used for the masthead/allaround light in a '88 offshore, I just replaced the light and both lights come on when you switch on either navigation or anchor. I checked the wiring diagram and it is wired correctly, My guess is the switch. Any...