Recent content by highlander

great white

OK again, I have made the trip to the hotdog out of indian river dozens of times over many years and it has always taken about 100 gals of fuel....sometimes a little more or less depending on sea conditions. I made the two last trips with 2 stroke 250 ox66's and the fuel burn both times emptied...

to clear things up...i purchased 250 2 strokes to replace the 225 2 strokes as i was told installing 4 strokes requires new transom wholes....installer concerned boat always slipped and i might have to deal with transom rot and it would be costly to replace the transom....there has been no smell...

Well boat on blocks at marina so cant run now...original props went with old motors and last trip was to hotdog ,which is 45 miles.....trolled all day and the 150 gal tank went dry 10 miles on return trip....i normally burn 100 gals going to hotdog and back....made that trip dozens of times and...

I recently purchased 2twin yami 250 to replace twin yami 225 2 stroke on 2000 grady 272. Engines run great but increased about 40% fuel consumption which really destroys my range. I normally run up 3800 rpms and have consistently run this way with the 250's. My guages don't show any higher...

Any recommendations where to purchase 1999 ox66 powerhead? See a couple but want to know of anyone has any good experiences. Thanks

Anybody with a lead on 225/250 4 strokes for sale eastern seaboard Thx

Thank you for your non anatomical answer

What is the correct shaft size for 2000 Grady 272?

Port motor seized it was 1999 225 2stroke ...would consider twin 225 4 strokes.if good price Located in Delaware but would travel east seaboard within 100 miles Thanks

want to purchase sat imaging and realize there are different companies offering thermal imaging. Does anyone have reccomendation or pros and cons of their use of these these apps? thanks fishing the Northeast

Need new hatch and live well hatch piston and need to know what size they are as most of mine are missing or so rusted that I am unable to see any info on the cylinder Thanks

let me know if the offer does not happen....thx

My 50 gal reserve tank needs to be emptied. I bought a fuel pump and tried removing through the fill opening. No luck. I removed the aux fuel line from the water separator and attempted to suck it out. No luck. I opened the inspection plate to access the top of the tanks but the bolts look...

Thanks I have removes and tested both pumps and they do not spin when 12 v applied.