Hockeysurf7's latest activity
-
H4 months in the water and my light look like this try to figure out what is cause this. i have a bonding wire but is connect to a buss...
-
-
HHockeysurf7 replied to the thread Transducer on Euro Transom.This is where i have it now my only concern is it being in front of the lower unit causing air bubbles
-
-
HWhere can the transducer be mounted on a euro transom? Trying to figure out the best spot to mount it
-
HHockeysurf7 replied to the thread Thru-Hull Intake Strainers.https://www.westmarine.com/groco-full-port-flanged-bronze-seacock-3-4inch-pipe-size-129009.html?queryID=0be316d87224f103cb05d6d814321813&...
-
HHockeysurf7 replied to the thread Thru-Hull Intake Strainers.Ok, that's not great. Now I feel like I have to replace these
-
HReplacing the strainer and valve on my 1994 Grady white Chase, trying to figure out what parts they used, I picked up a Groco strainer...
-
-
HHockeysurf7 replied to the thread B175m 1 kw install.How has the transducer been working? I've been looking for a spot to mount a B175 on my 263 chase. The only spot seems to be between the...
-
HHockeysurf7 replied to the thread Yamaha F150 troubles.Repowered with 2006 yamaha f150 didn't get the boat in that summer so i winterized it like it was a two stroke with fogging spray and...
-
HHockeysurf7 replied to the thread Yamaha F150 troubles.I had a problem where I had vibration in idle and low RPMs. It ended up being one fouled plug in both engines; they were running on 3...
-
HHockeysurf7 replied to the thread Grady White Chase 263 transducer mounting.Thanks for the reply its is a b744 there is two transducer not sure what the other one is. leaning towards getting a b175 and mounted in...
-
HHockeysurf7 replied to the thread Grady White Chase 263 transducer mounting.i would believe that this an ideal spot
-
-
HHockeysurf7 posted the thread Grady White Chase 263 transducer mounting in Tips, Modifications and Electronics.Hi, I want to install a new transducer on my 1994 Grady white chase 263. So far, I am leaning on getting a B175HW; however, I am trying...
-
