Hookup1's latest activity

  • Hookup1
    Hookup1 replied to the thread pulpit.
    Some high stress attachments like cleats, awning track, bow pulpits and swim platforms should be bedded. The constant stress of flexing...
  • Hookup1
    Hookup1 replied to the thread Starter help!!.
    Check kill switch lanyard clipped in. Make sure shift is in neutral. Clip volt meter to ground and small lug on engine starter...
  • Hookup1
    Hookup1 replied to the thread Starter help!!.
    What does “checked batteries there good” mean? Tight connections are important but I would bet on bad battery. How old is it...
  • Hookup1
    Hookup1 replied to the thread Electric Reel outlets.
    The reels ship with alligator clips. Cut them off and install the Marinco twist lock connector. These are adequate for medium side...
  • Hookup1
    Hookup1 replied to the thread pulpit.
    Put a picture of your pulpit up. On my islander there were 4 large bolts that had to be unscrewed from inside the anchor locker. And...
  • Hookup1
    Hookup1 replied to the thread Electric Reel outlets.
    I installed a pair of these Marinco outlets for my Daiwa TB750 reels. Installed under gunnel as the rear of the boat. You can install 20...
    • Reel 1.jpeg
    • Reel 2.jpeg
    • Reel 3.jpeg
  • Hookup1
    Hookup1 replied to the thread windows removing.
    The front windows are a lot of glass work. I had the tower off and was refinishing the console bubble anyway. When you take the side...
    • Window 1.jpeg
    • Window 2.jpeg
  • Hookup1
    Hookup1 replied to the thread Yamaha F200 - Ideal Prop.
    My number only reflect what happened with my boat. Game changing performance. Your have different boat and different power. Talk to Ken...
  • Hookup1
    Hookup1 replied to the thread Starter.
    Make sure all your battery connections (+ and -) are tight before you order a started. Positive and negative. Put a wrench on them...
  • Hookup1
    Hookup1 replied to the thread Marlin window leak.
    Billy - Frank from Cape Self Storage. Most of the GW windows an parts are no longer available. These windows were made to GWE specs. You...
  • Hookup1
    Hookup1 replied to the thread Marlin window leak.
    You have your answer on your other post...
  • Hookup1
    Hookup1 replied to the thread Grady White 2006 222 Fisherman, T-TOP Equipment Box, VHFs, back up GPS, LED Lighting power.
    Not sure what you are looking for. My Islander upper electronics box is like yours. You could flush mount and close the box up but most...
    • 8610 Overhead Box.jpeg
  • Hookup1
    Hookup1 replied to the thread windows removing.
    My 1997 Islander window is an inside/outside sandwich. Take the black rubber strips off the outside to expose the screws. Take the...
  • Hookup1
    Hookup1 replied to the thread Starter.
    What have you found so far with your searches? Start with Google. Help us help you!
  • Hookup1
    Hookup1 replied to the thread flush dash panel for 2004 282 Sailfish. Anyone done this?.
    This is my 268 Islander helm flush mount. Material is Starboard in Seafoam. White may also work depending on how faded your gelcoat is...
    • 8612 and panel.jpeg
Show older items