Hookup1's latest activity
-
Hookup1 replied to the thread Young man’s first fish.Congratulations to both of you! Nothing better than fishing with the kids. -
Hookup1 replied to the thread Console Windshield fasteners loose.OK. So what have you found... As Seasick said do the screws come out or are the captive? Can you get behind it to see if they are thru...
-
Hookup1 replied to the thread Newbie Question.Those fittings are above the waterline. Trace them out. Scuppers are same height as the deck. If water is getting in that is where I...
-
Hookup1 replied to the thread Replacement Wood and Clear Cover.That thread was started by Ky Grady and SkunkBoat. As I followed it I decided it was time to upgrade mine.
-
Hookup1 replied to the thread Replacement Wood and Clear Cover.Go to post #71 for my project details. https://www.greatgrady.com/threads/my-next-project.37772/page-4
-
Hookup1 replied to the thread Top & Windshield Upgrade.I have a one piece polycarbonate front. It does get warm even without the sides and vent windows open. I like the idea or venting the...
-
Hookup1 replied to the thread Console Windshield fasteners loose.Try to get behind it to install new screws with washers and nuts. You could also go to a larger oval hard screw with finish washers...
-
Hookup1 replied to the thread 226 Seafarer anchor light wire.Difficult to splice or impossible to splice? There is a difference. How about a pic? I doubt you will find a "trick" way to replace...
-
Hookup1 replied to the thread 226 Seafarer anchor light wire.If the wire is not broken and you have a little of it exposed spllce, solder and shrink a new wire on. Crimps are too bulky. My best...
-
Hookup1 replied to the thread rain water 265 express.Water could be coming from anywhere on the boat. GW has a 1/2" PVC pipe imbedded in the hull that runs from the forward bilge to the...
-
-
Hookup1 replied to the thread Pilot seat base repair.Pictures are always helpful. I have no idea what your boat looks like, where this is happening and what is underneath. My seat slide...
-
Hookup1 replied to the thread Macerator not pumping in GS 232.I haver always had problems with these pumps lifting. They quote: Jabsco macerator pumps are capable of self-priming and lifting waste...
-
Hookup1 replied to the thread Hardtop fiberglass repair.I refinished my hardtop a few years ago. Gelcoat chipping all around and heavy chalking. Also no reinforcement for the rigger bases...
-
-
Hookup1 replied to the thread Macerator not pumping in GS 232.Put a picture or two up of your tank and macerator. What is the manufacturer and model of the macerator. Older GW used a in-tank Groco...
-
-
Hookup1 replied to the thread 2021 freedom 307 latch to sliding door.How about a photo of the latch. Not sure if its different than mine.
