Hookup1's latest activity
-
Hookup1 replied to the thread Bilge pump water intrusion?.There are so many places that could leak that are hidden. Could be rub rail, windows, scupper hoses, it’s a long list. There is a 1/2”... -
Hookup1 replied to the thread Bilge pump water intrusion?.Both bilge pump exhausts on the Islander are mounted high off the waterline (about 18"). There are no check valves. I have broken both...
-
Hookup1 replied to the thread Hardtop Mounted Outriggers.Switched haylard locks from Rupp to GemLux. Much better locking and less wear. Same setup. Equal length long/short, cam cleat tensioner...
-
-
Hookup1 replied to the thread Help me figure the AWG wire for my trolling motor.Check the max wire size for the trolling motor connector. You may need to drill out the back to accommodate 6 awg wire. I would no go...
-
Hookup1 replied to the thread Grady 275 Freedom Twin 250 Props?.Call Ken at propgods.com with your numbers. He spec’ed mine for the same reasons you mentioned. Game changing improvement.
-
Hookup1 replied to the thread Rusty leak from gunwale in Freedom 235.Grab it with your hand and feel the stepped thickness. Wood under mine! This isn't the most structurally important part of the boat...
-
Hookup1 replied to the thread Rusty leak from gunwale in Freedom 235.My corner bolster that wrapped around was a constant source of brown stain running down inside the boat. When I finally opened it up I...
-
-
Hookup1 replied to the thread 12v refrigerator.It would be helpful if you got there refrigerator make and model from the tag inside it. Also look for controls inside in the upper left...
-
