Hookup1's latest activity

  • Hookup1
    Does the actuator travel the full length forward/backward? If it does then the seat is mounted incorrectly. GW should be able to tell...
  • Hookup1
    If you have the manufacturer of the seat I would call them. GW Customer Service should be able to tell you that. My guess is that the...
  • Hookup1
    Hookup1 replied to the thread 100 mA relay 12Vdc.
    My problem is when something starts beeping at the helm I can't tell what unit the alarm is coming from! Could be a Yamaha engine alarm...
  • Hookup1
    Hookup1 replied to the thread 100 mA relay 12Vdc.
    Looks like it's for anchor radius. Anchor Alarm on a Garmin Marine Device Several Garmin chartplotters allow a user to set an anchor...
  • Hookup1
    Hookup1 replied to the thread 100 mA relay 12Vdc.
    Amazon has relay's that would work. Get one with a socket and pigtail wires. Something like this...
  • Hookup1
    It's not all condensation. The pie plate access ports are leaking. If liquid is discolored it's probably a rotted deck panel (leaking...
    • 2 Tanks uncovered.jpeg
    • IMG_0273.png
    • IMG_1107.jpeg
  • Hookup1
    Hookup1 replied to the thread Transom Construction.
    We are talking about two different things. The “bang cap” is non-structural trim to seal the top transom edge. The other is the...
  • Hookup1
    I came back on one engine one time because the engine would click, engage starter and not crank. Was a loose nut on engine cable ground...
  • Hookup1
    Hookup1 replied to the thread Transom Construction.
    Transom laminates design from GW. I'm planning to do the transom on my 1997 Islander next year. It will be double 3/4" Coosa board. Done...
    • Screenshot 2025-10-20 at 8.54.39 PM.png
  • Hookup1
    Hookup1 replied to the thread Need Fuel Valve help.
    I think you got your answer. Sometimes you just have to commit! We can only get you so far.
  • Hookup1
    Hookup1 replied to the thread Raymarine E120 fix or replace.
    None of the manufacturers go out of their way to support really old units. It's easy for me to spend your money - it's time for an...
  • Hookup1
    Slow down. Are we to assume that this all worked properly yesterday? If the port side just clicks make sure your engine battery...
  • Hookup1
    Hookup1 replied to the thread Time for an electronic upgrade.
    I didn't want to block my view out the windshield. I raised the front panel 3/4" over the existing electronics box. Had to hack the box...
    • IMG_2069.jpeg
    • 8612 frame.jpeg
  • Hookup1
    Hookup1 replied to the thread new tanks.
    One large aluminum tank would have to be shortened to "drop in". With two tanks I would keep fuel valves the same. It's just a little...
  • Hookup1
    Hookup1 replied to the thread new tanks.
    As Dennis said there is a bulkhead between the forward and aft tank that has to be removed. May have to cut the step to get it out. Look...