Hookup1's latest activity

  • Hookup1
    Fraudulent fraud department calls have been happening in the last two years. They are very good and could easily work for the bank in a...
  • Hookup1
    Hookup1 replied to the thread Pulling Dredges on a 330.
    Dredges and all the teasers are primarily for white marlin fishing on the east coast. We do get big blue marline in on them as well. I...
  • Hookup1
    Hookup1 replied to the thread Pulling Dredges on a 330.
    I ran the cockpit on a friends boat for all the big tournaments in Midatlantic region. MA 500 and WMO for the last 15 years. Custom 56'...
  • Hookup1
    My builder is SP Tanks in Clermonte, NJ. You will have a shipping expense problem with anyone. See if there are boat builders in your...
  • Hookup1
    Hookup1 replied to the thread Adding a boat to the family.
    NewWire is a great choice for a switch panel upgrade. I did mine last year.
    • Finished Gauge.jpeg
    • Finished Switch.jpeg
  • Hookup1
    Sorry about all the clutter. I re-covered my existing foam with a SailRite Covington Riad Denim 58" Fabric. Also did backrests. This...
    • Interior 1.jpeg
    • Interior 2.jpeg
  • Hookup1
    Hookup1 replied to the thread Replacing a Prop Shaft Yourself..
    I bent mine last year. After hours of hard work by my experienced Yamaha mechanic he finally gave up on getting the shaft out. The lower...
  • Hookup1
    Hookup1 replied to the thread Wrong Way Corrigan.
    I agree North-up without a heading sensor will work fine for finding a wreck. The bow direction of the boat icon on the screen won’t be...
  • Hookup1
    Hookup1 replied to the thread Wrong Way Corrigan.
    I always run North-Up now on my Garmin units. That will prevent chart plotter from spinning. I guess the radar too. The boat will spin...
  • Hookup1
    Hookup1 replied to the thread Wrong Way Corrigan.
    The GPS can guesstimate your heading accurately by looking at your COG - course over ground. Problem is when moving slow - maybe you are...
  • Hookup1
    Hookup1 replied to the thread 263 Chase Livewell Pump.
    My live well and bait tank pumps are Rule pumps. They screw into the clamshell pickup that may have a wash down pump on it now that can...
    • Screenshot 2026-03-03 at 4.00.03 PM.png
  • Hookup1
    Hookup1 replied to the thread Screw Cap Window Insert 1993.
    Not clear from photo what you are really looking for. I assume it's that black plastic strip. I second Marine Glass Specialties.
  • Hookup1
    Hookup1 replied to the thread Bimini 306.
    Is this for topside exposed gelcoat? That FL sun will bleach it out. You are in a good area though. Ask around to find a good pro and...
  • Hookup1
    It's difficult to work on the holding tank on my 268 Islander. Not familiar with your boat but given it's smaller it doesn't get easier...
    • Macerator 1.jpg
    • Macerator 2.jpeg
  • Hookup1
    Hookup1 replied to the thread Head.
    I have a working head with holding tank on my 268 Islander. It's almost never used as a head. I line the toilet with the black 5-gallon...