Recent content by Irish eyes

Good info thanks all !

Fishtales, did you power wash the hull end of seasons , and if so did you have bottom growth

Purchased last year a new to me a 2013 Grady White 209 Fisherman from a private sale that was maintained by the local Grady dealer. The seller had the boat detailed and bottom painted using Seahawks AF 33 ablative paint. Doing research for the up coming season and Seahawk AF 33 is a multi year...

2013 209 Fisherman new to me last year . I removed the 60 qt igloo cooler for the winter and noticed a sticky padding material on the cooler bottom. What can I use as a replacement material I’m assuming it’s to prevent cooler slipping and banging . Thank you

Attended Rhode Island Salt Water show the other day , Grady dealer had a new 208 with Bennet tabs with R3 Anode attached to each tab. Im going to add them this spring

Nautical One stuff works great !

Recently had work done by Building 21 Rockland ma

hahahaha

I have a 2013 Lowrance HDS 10 GPS/ Fish. The sun cover got blown overboard last season and looking for a replacement or what I can do for a DIY thoughts? Thanks

Same problem, tapped the trim motor and motor will trim up and down. Going to replace trim motor this winter

If your financing , a survey may be mandatory . Also surveyor will do comparable boat sales in your area the $ .450 cheap Insurance for piece of mind

Thanks for input

New to me 2013 Grady Fisherman 209 CC does anyone use beanbags ? My current bean bag is a E Searider medium teardrop that we used on the previous boat and is to large . I was thinking on removing bow Igoloo cooler seating and replacing it with E Searider Wedge bag . any opinions Thanks

All four sides have piping that is slide into a channel channel is riveted to t top pipes

New owner of a 2013 Grady Fisherman 209 . The T Top mesh storage bag zippers are corroded and broke apart .Separated the zippers so it’s now open . There’s cording on the fourside of the bag that slides into tubing which is riveted to the T top piping . It looks like you have to drill out the...