Recent content by Jmdix123

Yes it leaks no matter what faucet we use and when you just turn on the pump , it is a pull out nozzle

Yes maybe I can try that to see where it’s leaking ty

I will give it a shot , I seem to have several leaks in the water system ty

We tightened the clamps , but I guess we ca try and pull them off and inspect them

It’s the lines going to the faucet , we tightened the clamp d but it’s still leaking from somewhere, bit you can’t get under there to see you have to feel for it and there’s no way to remove anything unless you cut the sink out

Actually worked for me too , thank you

Any one have any suggestions for fixing a leaking faucet hose in the galley , I can feel the leak but there is no room to see where it is actually coming from or to repair

It is very hard to get too and I hit the vent with the power washer from the outside, guess we will see in the spring

I just got my boat out today and after power washing I got a pair of bent nose pliers and was able to pull out the mesh screen , it seemed all kinked up , hopefully that solves the problem

Ty I will give that a try

I’ll give that a try , the small little metal thing on the outside of the hull?

I believe there are 2 hoses 1 bigger and 1 smaller ,very difficult to get at with my boat ,next boat will have easier access to everything if possible,lol

What’s the easiest way to reach the hoses , I don’t think it’s full there is a lot of air pressure at the pump out cap when I remove it

My waste tank seems like it’s filling too fast ,almost like it’s not getting into the tank ,when I remove the pump out cap it overflows from air ,im assuming there is some kind of vent blockage ,not not sure how to find it or what it actually looks like ,any help would be appreciated

seems like a pain in the ass , not sure if i will now either