kirk a's latest activity
-
kirk a replied to the thread Talk me into it...Moved up from a 23 Mako to a 33 Express. No regrets. Back story is that I took my wife on a day trip to Martha's Vineyard. We were... -
kirk a replied to the thread Triple Rod Holders??.I've thought about it, and nearly purchased some from a welder at the fishing show this winter. I elected to stick with the extra...
-
kirk a replied to the thread Water dripping in at planing speed.@baytripper89 - can you post a picture of the impacted area? Many of us have different models, and are not familiar with the specific...
-
kirk a replied to the thread New Canvas - what to do.Got the new enclosure installed Friday. Overall, quite happy with it. Some thoughts after doing it. The approach I asked about...
-
-
kirk a replied to the thread Offset hinge for cabinets 330 expresa 2007.Here is the direct link. This should be what you are looking for.
-
kirk a replied to the thread Offset hinge for cabinets 330 expresa 2007.Boat Outfitters has those. Go under OEM, select Grady White, and scroll. I needed one a while back.
-
kirk a replied to the thread New Canvas - what to do.Thanks, JJF - I have a similar tool from Sailrite I can use. @wspitler - looking at the curtains, most of the panels are primarily...
-
Depending on your temperature, let your Canvas hang for a day or two before you install the snaps. It will stretch out and the Canvas...
-
for placing the snaps I have some you are welcome to borrow, https://www.sailrite.com/Quick-Fit-Pin-Socket-Snap-Positioning-System
-
I put a 4D sized AGM in that generator space for added 12V battery capacity (now my Bank Two). My Bank One are the 4 Group 27's...
-
Clove hitch is always ready.
-
kirk a replied to the thread New Canvas - what to do.Next question as the panels are lying flat and we are working out the bends. When it is the initial installation time, is there a...
-
OK, so SG is basically the same as normal isingglass - but better with a special coating, too. BE CAREFUL with cleaning - use only...
-
kirk a replied to the thread 265 Express center rigger.Here is a photo I found showing the halyard. It is the red cord in this picture. It is still a bit high - I’m 5’8” tall, but I also...
-
-
kirk a replied to the thread 265 Express center rigger.Not a 265, but on my 330, I run the center halyard to the base of the middle rod holder on the port side. It is slightly forward of the...
