Recent content by mg1826

I have a 2007 330 and repowered with 300's last fall. The Prop Gods and two other prop shops recommended the Power Tech OFS04 15" 4 blade props. I purchased the props at the very end of the season and was only able to run the boat once. Very noticeable difference in increased bite with...

Thanks for the feedback. What model/how many pick ups did you go with and where did put them?

We've been installing the Black Oak Led lithium batteries with charging system for trolling motors and the feedback has been great. As Kevin from BOE stated above, I also hear great things on the Dakota batteries. Happy to quote you for the Black Oak products shipped to you.

So it looks like the people at Bilge B Dry listened to all the concerns and feedback. It will be interesting to see exactly what the updates will be and what the "optional connection to a helm or float switch" will look like.

Hi Dennis, the A/C drain pan is plumbed to the head/shower box but I do get some leakage into the bilge at times. I'm planning on cleaning out the AC drain pan and replacing the drain lines over the winter.

Thanks for all the great feedback. My 330 is in a slip with shore power and a battery maintainer is connected to my batteries. These products would be great if some kind of sensor was built in to know when water is detected and when it’s dry. I do currently have low profile auto bilge pumps...

Looking for recommendations and/or feedback from anyone that is using a Neputunian Sky Bilge B Dry system, SEAFLO Dry Bilge System or similar set up in their boats. I have a 330 Express and am aware that these boats typically have some level of water in the bilge but I'd love to minimize it as...

I have 4 Lumitec Seablaze white/blue lights on my 330 Express and in my opinion it's the perfect amount for awesome light output. Proper prep and installation will ease any concerns on putting a hole in your boat. I have a dealer account with them if you want to pm for any options/pricing.

The punch list you mention are all expected maintenance items for a 330 of that age. The concern of moisture is a real thing and typically comes from the side vents. The transom moisture issues could be from a corroded bang cap that is leaking, engine bolt holes, etc. How did you check for...

Thanks for your quick reply and advice. I was able to find my owner's manual and confirmed that they are 6" plates.

I'm also going to be replacing all 5 inspection ports with screw in plates. Just to confirm, are they 6" or 8"? What's the best practice for installing the new ones as far as using a sealant in the screw holes and under the port? Is a sealant/epoxy/caulking needed? I also want to replace the...

I’m going to be replacing the original sea water strainers for the generator and air conditioning. Can anyone confirm what size/model Groco unit I need? I’m not sure if they are 1/2”, 3/4” or maybe even 1”?

I’ve used Chris Stevens at Sterling Associates for my last three loans. In my opinion, they are one of the very best in the business. Each loan was executed quickly and they handled everything, including the USCG documents and processing. Highly recommended. https://www.boatbanker.com/

Taco makes rub rail end caps in 1-7/8" stainless or 2-19/64" polished. Not sure if that works for your application or not. Below are the photos of them. PM if you need help/pricing ordering.