seasick's latest activity
-
Sseasick replied to the thread Corrosion of trim pump.That may be the case but without knowing how long the anodes were in service, you can assume it is a stray current issue. The anode as...
-
Sseasick replied to the thread Wring path on 330 Express.The Harbor freight 'snake' kits are somewhat cheaply made but fine for every now and then cable pulling jobs. They are under 10 bucks...
-
Sseasick replied to the thread VIN numbers.Depends on the state. In some states it is close to impossible to re register a trailer as homemade
-
Sseasick replied to the thread Help a GW Newbie - De-winterization.After a winter sitting, there is no way the batteries will produce 12.8 volts. Do as Dennis recommends. As to what needs to be done to...
-
Sseasick replied to the thread Corrosion of trim pump.That anode is way past replacement time. It probably does not provide any protection. Corrosion on the tilt motor housing is pretty bad...
-
Sseasick replied to the thread 2005 Kenwood KDC wiring question..I'm shocked by this. Granted it probably draws milliamps, but it is a draw. I also noticed the radio goes to sleep a while after the...
-
Sseasick replied to the thread Matching (or close) Bottom Paint.
-
Sseasick replied to the thread Ceramic coating?.I think the only way to compare is to dunk your car in salt or brackish water, let it sit for a week or so and then see how it cleans...
-
Sseasick replied to the thread Islander 268 fuel help.One of my previous boats had Mercs with command link gauges. Although the senders in the tanks were the conventional type electrically...
-
Sseasick replied to the thread 200 HPDI Yamaha Two Stroke Gas.I was in lala land. Actually the octane minimum ration for regular grade of gasoline is (pardon the pun) regulated by the state. Most...
-
Sseasick replied to the thread 200 HPDI Yamaha Two Stroke Gas.That motor may need 87 octane and regular at the pump is near 84. I am pretty sure that motor does not have a knock sensor that can help...