seasick's latest activity

  • S
    seasick replied to the thread 3 way fuel selector-Moeller 033302-10.
    I don't use Teflon tape on gasoline fittings. I use a gasoline approved paste. It's not that the tape gets dissolved as best I know but...
  • S
    seasick replied to the thread help with rear-facing jump seats.
    Looks similar to a flats type boat seat Look at this link for ideas and info and make note that there is a swivel mount with quick...
  • S
    seasick replied to the thread Wide beam hull delamination.
    It is hard to tell how far the delamination has spread on the hull sides. The earlier hulls are cored with end grain balsa blocks from a...
  • S
    seasick replied to the thread 205 Tournament.
    I prefer the Dometic Seastar Extreme product. As to length, I don't know. Some might suggest calling Grady but I have been told the...
  • S
    seasick replied to the thread Changed rides but want to stay..
    Trapper, I am in a similar position, sold the 208 and moved on to another brand. The folks on this board were very kind and welcomed me...
  • S
    seasick replied to the thread New trailer has odd tire wear?.
    Usually, excessive wear on both outer edges is a symptom of low tire pressure.
  • S
    seasick replied to the thread Can I use a F350hp on my Islander ?.
    Do your research on those 350s.
  • S
    seasick replied to the thread 2023 Dockage Rates.
    One surprise may be when you find out that some marinas price by the actual total overall length of the vessel including pulpits...
  • S
    seasick replied to the thread Boarded by the CG.
    In my case, they didn't ask about it at all. It was locked however:)
  • S
    seasick replied to the thread Battery charger.
    The fog would have little effect on bilge water. In addition regarding rain, that hull is usually pretty dry in the bilge area. If your...
  • S
    seasick replied to the thread Can I use a F350hp on my Islander ?.
    Are you looking at a new 350 or an older model year? I ask because I would be very leery about earlier model year 350s. Many had some...
  • S
    seasick replied to the thread Boarded by the CG.
    I was boarded at the end of last season. Pretty much the same questions with the addition of asking if I had Boater Safety Certificate...
  • S
    seasick replied to the thread Battery charger.
    I don't mean to sound cheeky but the best place is close to the batteries:). You may not need a built-in charger though. If you get a...
  • S
    seasick replied to the thread Freedom 225 2014 Engine Bracket Paint.
    For aluminum hulls, the barrier coat help protect against galvanic corrosion. I would recommend a barrier coat for aluminum applications...
  • S
    seasick replied to the thread Freedom 225 2014 Engine Bracket Paint.
    That sounds good for fiberglass but I wouldn't go that route for aluminum. Aluminum has a higher temperature expansion factor and gel...
Show older items