seasick's latest activity

  • S
    seasick replied to the thread Grady Stringers and Knees?.
    It is hard to estimate how slowly or quickly moisture will travel. There are a lot of variables including the climate the boat is stored...
  • S
    seasick replied to the thread Adding a Fuel Bladder -- grounding.
    I suggest you contact the manufacturer of the bladder you would use and ask for advice. I suspect that no protection is needed...
  • S
    seasick replied to the thread Fuel tank idea - comments?.
    The reason for the pin holes is corrosion from galvanic activity that is generated when the aluminum comes in contact with another...
  • S
    seasick replied to the thread Why does my 228 have 3 pick up thru-hulls?.
    I'm thinking of a model year......... Look up archived brochures for Grady White ( for your year). It may list options
  • S
    seasick replied to the thread Autopilot and SeaStar question(s).
    If you say you have already bleed the system and did it correctly(:)) I would then disable the autopilot and see if the skipping...
  • S
    seasick replied to the thread Flush Plug 0-Ring.
    As mentioned by Hookup, go to Home Depot or the like. It helps to bring the fitting or better yet the old o-ring. If you have twin...
  • S
    seasick replied to the thread Flush Plug 0-Ring.
    What flush plug? If you mean the fresh water flush connection for the outboard, the connector is garden hose size, nothing special
  • S
    seasick replied to the thread Butt crack question.
    The seats for the adventure are somewhat narrow and can be a challenge to find options that fit in normal position and also are able to...
  • S
    seasick replied to the thread First time Grady White owner - Seafarer 228..
    Fir dual axel trailers, 5% is the appropriate starting point. I agree that your current placement of the boat is too far forward. It is...
  • S
    seasick replied to the thread question about varying twin engine trim and boat list.
    Trimming an engine up changes the direction of the thrust and points it downward relative to the hull bottom. In theory that causes the...
  • S
    seasick replied to the thread Rusty leak from gunwale in Freedom 235.
    The three holes on the lower edge of the gunnel is where the screw that holds the bolster in place is screwed in. Normally the screw is...
  • S
    seasick replied to the thread ? on wiper.
    The old style 'saddle' mount blades are more difficult to find especially OEM Anchor. Saddle mount is the type that attaches to the arm...
  • S
    seasick replied to the thread Grady 340 Express Announced.
    Seakeeper has announced kits for filling in trim tab pockets on some boats. I believe a few Grady model are available or will be soon...
  • S
    seasick replied to the thread Grady 340 Express Announced.
    Seakeeper Ride is the trim tab like product.
  • S
    seasick replied to the thread Grady 340 Express Announced.
    Gyroscopic stabilizer, very expensive option and expensive to maintain.
Show older items