seasick's latest activity

  • S
    My thinking is that the numbers are in a way a part number. The part number is made up with the dimensions although I couldn't figure...
  • S
    seasick replied to the thread Garelick Footrest Knob.
    I would bet that Garelick did not make the knob but out sourced it. The important spec is the thread size and pitch and of course the...
  • S
    suspect that is the dimensions in centimeters of the end grain balsa coring. Equivalent to 18 inches by 192 inches.
  • S
    Sounds like a good plan:)
  • S
    avoid using a Scotch Brite pad ( if it is not the scratch free type).
  • S
    seasick replied to the thread High pressure flushing.
    There is some water pressure at the flush port. If the port is not capped off, the internal water pressure can be lower than it normally...
  • S
    A heads up on the carbureted motors: Do not change any of the throttle adjustments other than the main idle speed screw on the linkage...
  • S
    seasick replied to the thread High pressure flushing.
    I assume you are flushing using the flush hose port and that the motor is not running. If so, I don't see any problem. The question has...
  • S
    seasick replied to the thread Bahamas on mid 90's two strokes?.
    If you have issues with the precision oiling system, that can take a while to show up. The idea of putting some more hours sounds like a...
  • S
    Good info here BB Marine.. First let's verify if the motor is injected. My first thought was that the 'clean' plug is not firing. You...
  • S
    If you have water in the gas/air mixture, I would expect to see steam coming out of the exhaust. That would result in a white exhaust...
  • S
    seasick replied to the thread Canvas cost for a 33 Express.
    What year is the boat? There are fabricators who made the canvas for Grady. They usually can make the panels using original patterns...
  • S
    seasick replied to the thread Hit dock a little hard.
    If you hit with the rub rail, it is possible (but no likely in this case) that the cracking you heard was the joint between the deck...
  • S
    seasick replied to the thread 257 fisherman.
    Who selected the surveyor? If it was the dealer, beware. If the dealer gave you a list of surveyors, that is a bit better. You just have...
  • S
    seasick replied to the thread 257 fisherman.
    Will you be there for the survey? Note that used boar prices have fallen a bit this year as opposed to the insane increases during...