seasick's latest activity

  • S
    seasick replied to the thread Head.
    I 'accidentally' deleted my earlier response so in summary, the picure in the OPs post is a porta potty style MSD. I had the same in my...
  • S
    seasick replied to the thread 263 Chase Livewell Pump.
    The size of the pump is related to the livewell size which you know and the type of bait you want to use it for. Too big a pump and some...
  • S
    seasick replied to the thread Wrong Way Corrigan.
    Based on the OP location, the declination would be about 10 degrees so that doesn't explain the 20 degree difference. One simple test...
  • S
    seasick replied to the thread Under Bow access?.
    Let us know what you discover. Good luck, hope it's something simple.
  • S
    seasick replied to the thread Under Bow access?.
    Maybe not a good idea. Connecting two speakers in parallel will halve the ohm load seen by the stereo or amp. That can cause overload...
  • S
    seasick replied to the thread Hull Paint / Thru Hull Fittings?.
    In theory chrome over bronze thru hulls should not be painted with copper based bottom paint. In theory also, chromed thru hulls should...
  • S
    The smell from a leaker sender will last longer than fumes permeating an old fill or vent hose.If you top off your tanks when filling...
  • S
    On original SX motor props, you have to remove the prop to see its specs which may be stamped on the inside of the back (facing the...
  • S
    Crusty hull will slow the boat but we can't say for sure without knowing what prop you are running and if it is in decent shape. I do...
  • S
    seasick replied to the thread 272 transducer.
    Which bullet are you talking about? A DIY job or having it changed by a technician. What transducer do you currently have and what model...
  • S
    seasick replied to the thread Seakeeper Ride on Grady 235.
    I have heard good things about the Zipwakes.
  • S
    seasick replied to the thread Seakeeper Ride on Grady 235.
    The flow of water will rotate the vanes into the 'up' position if power is removed from the actuator motor. If my boat didn't have...
  • S
    seasick replied to the thread Transom Door Latch.
    A picture might help. Is it one of these? https://www.boatoutfitters.com/hardware/latches/barrel-bolts
  • S
    seasick replied to the thread Adventure 208 steering.
    The 208 does not have a rear deck lid. There are two pie plates in the motor well. You can see a bit especially with a mirror by looking...
  • S
    seasick replied to the thread Adventure 208 steering.
    I may have misled you a bit. I have run cables on different boats and mat have confused the 208 with a Mako I once owned. On the 208...