SkunkBoat's latest activity
-
SkunkBoat replied to the thread Bilge pump wiring woes.Was the original switch an Auto/manual? My Grady and many others only had a Manual switch. The "auto" float switch was fed from a... -
SkunkBoat replied to the thread Polishing fuel.Maybe you can get someone to take the gas?
-
SkunkBoat replied to the thread Light Cut Suggestions.3M Finesse It 2 works pretty good for what you describe. Then needs wax... Oh....not done by hand.... forget my recommendation...I...
-
SkunkBoat replied to the thread Polishing fuel.If you have ~200 gals of 1 year old (or older?) gas you are better off removing it and burning it in cars & lawn mowers(assuming it is...
-
Not NJ but I'm in OBX for a while and caught a few decent Gaffers Monday. Ran out of Oregon Inlet and fished south towards Hateras.
-
SkunkBoat replied to the thread Scupper hoses.Think about using a better hose. I used 1.5" Series 148 PVC hose. There is no metal in them. Not rubber. Smooth surface inside &...
-
SkunkBoat replied to the thread How to oblong a hole?.Start it on an angle to start slotting the hole. Then turn straight tofinish the hole. Not just widening the hole. Works on metal too...
-
SkunkBoat replied to the thread How to oblong a hole?.step drill bit on an angle... I remember when I replaced my helm, I had to buy the complete helm & tilt combo because you cant buy just...
-
I put three of these LOXX pull-it-up fasteners on the center helm piece. I have rigid ploycarbonate "glass" that folds inward and up to...
-
-
SkunkBoat replied to the thread 265x with a bow mount trolling motor?.I added (half-assed) bracing because it seemed to me that I could flex the 3/8" plate when the motor was down. Thats 8' of leverage and...
-
-
SkunkBoat replied to the thread NJ fishing reports.Launched Thursday. Friday opening day of seabass. Sucked. One keeper 4 tiny ones. Where are they ? I did, however, have my best...
-
-
SkunkBoat replied to the thread NJ fishing reports.Nice catch. Don't blame the circle hooks. They work much better than J hooks when freespooling live bunker. Dont set the hook, just let...
-
Last Saturday morning on the Shrewsbury river there were boats trolling right behind my brother's house. Ran up the Navasync, netted...
-
SkunkBoat replied to the thread S3213 fuel/water separator filter- Racor vs China noname from Amazon.another season, another trouble. So, last year I ended up with a Racor filter&bowl on one side and Sierra filter&bowl on the other...
-
SkunkBoat replied to the thread 265 Express center rigger.I have a center rigger that clamps to the rod rack on the hardtop. The telescoping pole is removable from the mount. Slightly off center...
-
