Recent content by Tomasz

I went to my local marine shop , they suggested a spray on elastic rubber It’s flexible, robust weather tight I got a can of raptor protective coating I can only try , there other products available but it’s a band aid solution at the moment Thank you for your advice

Thank you I’m going over this weekend to access the issue and hopefully find a solution in meantime I’m going to cover the cracks with gelcoat Once again thanks to everyone who have given me advice

Thanks for your advice It’s a 2002 sailfish 282 with twin 225 Yamahas I have it stored on dry racks I will this weekend have a closer look The rub rails are good Is the transom ply wood or synthetic? Thanks

Hi here are some pictures of my engine bay where meets transom Statred about month ago what should I do?.

G’day I need some assistance I have 282 sailfish 2002. I’ve started to notice hair lines appearing in the bottom of my engine bay where meets the transom. I’ve had the boat surveyed about 1and 1/2 years ago and got the all clear. I’ve done a bit of knocking around the transom today it sounded...

Hi I’ve measured and only 4 inch fits Unfortunately and I’m leaning towards the 5200 as I need that dive mounting plate installed permanently Hopefully I can take the old bolts easily now since the plate is loose as I need to fix the fibreglass crack first Thanks

Hi I’m going to cut 4inch inspection port in the engine bay wall just enough to slip my hand through Thanks for all your advice Will keep you posted how I went Thanks

Great thanks mate

Thank you for your advice What is 5200?

Hi Wondering if anyone had issues with a 3 step dive ladder mounting plate? Recently it has started to get loose every time it’s get used the plate privets and digs into gel coat I don’t have any access to tighten the bolts so was wondering if it would be possible to cut a hole Depends where...

And I’ve checked in transom area there was no sign of fluid

Yes it is We filled it just before testing and during

Thanks for all the help I found a good electrician and went throughly with the unit Ended up replacing a few wires as they had a lot of corrosion and success However the acutators aren’t moving In the Falange of the acutator there is nothing but air coming out So I need more help Thanks