Recent content by True Blue

  1. T

    GRADY WHITE 257 ADVANCE

    Hey Ninodog I have an Advance 257 and it only has the two batteries. I had a Sailfish before this boat and it had three batteries. The one switch went to two batteries and the two switch went toone battery. I suppose you could mount a third (or fourth) battery in the bottom of the console on...
  2. T

    Installing a low profile thru hull transducer

    Airmar B260 transducer install Hey Peter, I finished the install of the 20 degree tilted B260. After a lot measurements from the topside and bottomside of the boat I took the 4 inch hole into the bottomside of my Grady hull (this is not for faint hearted). After I got over this trama the...
  3. T

    Repair Simrad AP11 or replace?

    Simrad Power Board for J3000x junction box I have the AP11 for 257 Advance Grady White.Today I replaced the power board only for about $400. It seems to working fine now. Let me know if I can assist you. ray_pantlik@kiawahisland.com
  4. T

    Mounting low profile thru hull transducer

    Transducer mounting thru hull B164 Workdog, I really appreciate your detailed advice. I have a few questions (in red) so I can better understand your explanation. You may need to use a grinder (I used a dremel with barrel sander bit) to even the fiberglass on the inside of the hull...
  5. T

    Installing a low profile thru hull transducer

    I am about to install an airmar low profile thru hull tranducers on my 04 257 Advance. Does anyone have any advice on how to do this?
  6. T

    Mounting low profile thru hull transducer

    I am about to install a low profile tilted element thru hull transducer on my 04 257 Advance. Does anyone have any advice on where and how to do this?
  7. T

    PLEASE READ THIS AND RESPOND!!!!!

    True Blue Ray 2003 257 Advance 2003 225 4 stroke Yamaha
See more