Replacement locker/ drawer units?
- Thread starter X-Land
- Start date
Take a look at
www.boatoutfitters.com
They have stock parts or will custom make parts
Boat Doors, Deck Hatches, and Lids | Boat Outfitters
Shop our selection of doors, hatches, and lids to easily find an exact replacement or upgraded solution. From custom or exact replacement doors, deck plates, deck hatches, and livewell lids, Boat Outfitters offers a wide variety of parts for all your access and entry points.
www.boatoutfitters.com
Hookup1
GreatGrady Captain
- Joined
- Oct 16, 2007
- Messages
- 2,625
- Reaction score
- 717
- Points
- 113
- Age
- 69
- Location
- Cape May, NJ
- Model
- Islander
GW used a PVC plastic drawer system on my boat. It was a clever system. I used it on another boat I had as well. Unfortunately I can't find it anywhere.
You would buy a length of drawer material about 6' long and cut to length for drawer sides. There was a tool to cut oval notches in the ends of the drawer sides. There is a snap in corner piece to join the sides. A cut to size sheet of PVC was the drawer bottom. The side have a slot for the drawer bottom and s larger slot to the drawer rails. You can use clear PVC pipe cement to glue everything together if you want to. The stuff is so versatile I’m sure it’s still available.
My cabinet is made of melamine covered wood. The box is screwed in thru the fiberglass and a frame/door is screwed in from the outside. My frames are in bad shape too. I'll probably get Offshore Eddy to make replacement frames out of Starboard. Replace the doors too.
You would buy a length of drawer material about 6' long and cut to length for drawer sides. There was a tool to cut oval notches in the ends of the drawer sides. There is a snap in corner piece to join the sides. A cut to size sheet of PVC was the drawer bottom. The side have a slot for the drawer bottom and s larger slot to the drawer rails. You can use clear PVC pipe cement to glue everything together if you want to. The stuff is so versatile I’m sure it’s still available.
My cabinet is made of melamine covered wood. The box is screwed in thru the fiberglass and a frame/door is screwed in from the outside. My frames are in bad shape too. I'll probably get Offshore Eddy to make replacement frames out of Starboard. Replace the doors too.
Last edited:
November 2021 I had two new cabinets (to replace the wooden tackle draw cabinets under the seats) made up for me in Seafoam-colored Starboard by Fin Addict Marine in N.C. (referred to me by Grady White)
Not cheap, but excellent workmanship and quality!
Contact:
Cody McLean <cmclean@finaddictmarine.com>
Cody probably still has the drawings and specs from my job on file....not sure if the Gulfstream has the same sized opening below the seat, but it looks similar based on your pix.
Not cheap, but excellent workmanship and quality!
Contact:
Cody McLean <cmclean@finaddictmarine.com>
Cody probably still has the drawings and specs from my job on file....not sure if the Gulfstream has the same sized opening below the seat, but it looks similar based on your pix.
- Joined
- Aug 9, 2023
- Messages
- 9
- Reaction score
- 2
- Points
- 3
- Age
- 63
- Model
- Gulfstream
Thanks Finest Kind, these are the closest yet to our units. I'll follow up.November 2021 I had two new cabinets (to replace the wooden tackle draw cabinets under the seats) made up for me in Seafoam-colored Starboard by Fin Addict Marine in N.C. (referred to me by Grady White)
Not cheap, but excellent workmanship and quality!
Contact:
Cody McLean <cmclean@finaddictmarine.com>
Cody probably still has the drawings and specs from my job on file....not sure if the Gulfstream has the same sized opening below the seat, but it looks similar based on your pix.
Pfu
Well-Known Member
- Joined
- May 15, 2021
- Messages
- 154
- Reaction score
- 28
- Points
- 28
- Age
- 63
- Location
- Burlington Vermont
- Model
- Gulfstream
Try Ocean Breeze Marine Accessories out of Florida. 352-606-8999 or oceanbreezeMarieaccessories.com as they did great job on my rear transom hatch doors. I have more to don on my 232 and they will be my first call - great prices to go along with the workmanship.
Attachments
-
IMG_3866.jpeg -
IMG_3869.jpeg -
IMG_3867.jpeg -
IMG_3870.jpeg
These guys have been great!! Quick and quality work with both ready-to-ship or build to custom size options:
www.boatoutfitters.com
Boat & Marine Storage Compartments and Boxes | Boat Outfitters
Shop boat and marine storage compartments at Boat Outfitters. Big selection. 【FREE shipping】 from $150 ➔
www.boatoutfitters.com
Pfu
Well-Known Member
- Joined
- May 15, 2021
- Messages
- 154
- Reaction score
- 28
- Points
- 28
- Age
- 63
- Location
- Burlington Vermont
- Model
- Gulfstream
I believe I paid $130 each plus shipping.
Provided the size I required and they fit perfectly.
