Seafarer 228 Electronics
- Thread starter BRO-CAL
- Start date
-
- Tags
- electronics garmin seafarer
Don Davis
Well-Known Member
- Joined
- Mar 2, 2020
- Messages
- 354
- Reaction score
- 116
- Points
- 43
- Age
- 59
- Location
- Courtenay, British Columbia
- Model
- Seafarer
PNW_Drifter
Well-Known Member
- Joined
- Oct 20, 2019
- Messages
- 407
- Reaction score
- 158
- Points
- 43
- Location
- Seattle, Washington USA
- Model
- Seafarer
Bro-Cal, looks great! How about a side profile some time, to see how much bend in that panel.
Seafarer_Bob
Well-Known Member
- Joined
- Apr 20, 2020
- Messages
- 199
- Reaction score
- 85
- Points
- 28
- Model
- Seafarer
Really like it, nice job! I'm considering adding a second 8610xsv and wondering where you put the VHF. I don't have an overhead box under my roof so my initial thought was I'd separate the two gagues in the upper compartment and put the VHF between them.
Ps: I mounted my fusion radio on the side of the electronics box just inside the cabin and control it from my phone etc. Opened the box last summer and noticed it was really warm in there so I'll be cutting vents on the starboard side of that box soon.
- Joined
- Jun 20, 2019
- Messages
- 51
- Reaction score
- 36
- Points
- 18
- Model
- Seafarer
Dual Garmin 8610xsv. Earlier in the thread has the full bill of materials for all the electronics. Autopilot is Garmin Reactor 40 and auto trim tabs are Bennett Trim Tabs AP000A1HA AutoTrim Pro Hydraulic.
- Joined
- Jun 20, 2019
- Messages
- 51
- Reaction score
- 36
- Points
- 18
- Model
- Seafarer
Lots of pictures of install if you scroll up to original post.
RIVERTEC_FISH
Active Member
- Joined
- Jan 10, 2022
- Messages
- 34
- Reaction score
- 22
- Points
- 8
- Age
- 39
- Model
- Fisherman 180
Nice job, I just made a lower section out of di-bonded material and 3D printed some custom backers with riv-nut inserts. Also 228, I like yours bette!
Attachments
-
369475277_666066138838132_4523913537119900092_n.jpg