I have a 2023 fisherman 180- I want to add a wash down pump and use one of the leftover rocker switches on the main panel, I have looked behind the panel and the wires from the extra switches are bundled into the main wiring harness (which is covered) and I can't see where they go. Does anyone know where I should look for the live end of these wires? I assume they are down near the accessory fuse block so I can pick up the ground and run to my accessory. I can unplug the existing wire and run new- but that seems crazy as they already ran it for me.
Can't find end of accessory rocker switch wires
- Thread starter fishguy508
- Start date
Hookup1
GreatGrady Captain
- Joined
- Oct 16, 2007
- Messages
- 3,560
- Reaction score
- 1,006
- Points
- 113
- Age
- 71
- Location
- Cape May, NJ
- Model
- Islander
Download GW owners manual from GW. There is usually a wire list with all the color codes for the various devices.
Thanks
I emailed Grady White
They sent me the following info. The spare switches are wired for the options they would service. switch 5 to aft rigging area for livewell pump (I have this option);
switch 6 to aft rigging area for washdown- I will use it for my after-factory washdown; switch 7 ends under console for freshwater pump (I will use this for deck lights) all end in 2-pin Deutsch connectors.
I emailed Grady White
They sent me the following info. The spare switches are wired for the options they would service. switch 5 to aft rigging area for livewell pump (I have this option);
switch 6 to aft rigging area for washdown- I will use it for my after-factory washdown; switch 7 ends under console for freshwater pump (I will use this for deck lights) all end in 2-pin Deutsch connectors.
