Search results

  1. E

    Grady White 36' Express repowered with Yamaha 300 CV

    legit dealer do the work? props matched correctly?
  2. E

    Seacock stuck

    if they don't move easily once you work on them, time for new ones. they should be screwed in to the thru hull pickup so it should be straight forward replacement. need i say ALL work would be best done on the hard? good luck, ron
  3. E

    Moving motor flusher

    on a serious side, you may want to swap out the brass for bronze or a synthetic if you boat saltwater. i was going to do the external setup on the 330; it was getting to be too much bopping around back there. ron
  4. E

    Moving motor flusher

    not to blow up your shark tank dreams, but 1. saw that rigged on a 30+ Scout at an early 2000's boat show. everything external mounted to the transom and B. that's how they come from the factory now. o_O gonna save some monkeying around when flushing, that's all that matters. good job, ron
  5. E

    Drain in back of Boat

    where is it?
  6. E

    Bonding seacocks

    fwiw, i specifically asked GW about this a while back. they stated that they do not bond outboard motor boats. ron
  7. E

    Marlin 300 model refresh?

    they went thru an update recently. always room for a tweak.
  8. E

    STA-BIL 360

    you've obviously never boated in the north :D that's pretty much sop for our winter layups. mine comes out in October and back in April/May (last year end of June), that's what the stabil is for. and we have 10% ethanol. i always burn down the layup gas before i put fresh fuel in. if...
  9. E

    Cruising RPM's?

    yup. the 330 with F350's 3800 -4000, 4 blades. around 28 MPH depending on conditions. ron
  10. E

    Wireless MOB Kill Switches

    i've been using Autotether for about a decade or so. fairly simple. good luck, ron
  11. E

    Public Service Announcement

    docks are floaters. i'll cast for missing plug, broken thru hulls, etc.
  12. E

    help finding hatch flush nuts

    look up "sex bolts" you'll get more than enough options. good luck, ron
  13. E

    2021 Freedom 255 - is the Electric Head Fresh Water or Raw Water?

    can't speak to that, but the 2021 305 was raw water.
  14. E

    Appropriate dock lines

    5/8 double braid, pre spliced. at least that's what i use. chafe guards and snubbers for the dock cleats. i use multiple sets. dock lines stay so length is based on layout. on board are 30 footers. good luck, ron
  15. E

    Clean out fresh water tank

    http://www.camco.net/spring-fresh-1-gallon-bilingual-40207 i use this every year coming out of layup. good luck, ron
  16. E

    Kicker motor - Helm Master

    my 2 cents. in the old days of 2 strokes sucking gas, kickers seemed sop. i've been running F's since 2002 and use them at troll. like i said, just my 2 cents. good luck, ron
  17. E

    Gelcoat Repair

    https://www.westmarine.com/buy/west-marine--gel-coat-scratch-patch--P004_120_006_503?recordNum=5 this is what i use in "buff" . easy for small chips and such. fairly inconspicuous. good luck, ron
  18. E

    PEX water hose?

    https://www.whalepumps.com/marine/siteFiles/resources/docs/resource-library/WhaleQuickConnectv5_05_2019_RB.pdf i used this for heater bypass. good luck ron
  19. E

    AC - worth it?

    not sure i would do an AC on a DC here in the NE. :p but from what i understand you guys deal with a lot of humidity and it may be worthwhile as a dehumidifier at the dock. or if the cabin area is a size you would use, then for that. good luck, ron but that said, if you are already...
  20. E

    Eisenglass cleaning

    i've followed GW for decades. clean with denatured alcohol and protect with Plexus. couple other brands suggested. stock isinglass only. good luck, ron