Search results

I buy all my electrical stuff from http://genuinedealz.com/ or http://www.pacergroup.net/ and also local shops.

I have to disagree on the "salt water will eat up a '74 boat", the I/O engine yes, but not the boat. You might need stringers and transom in the worst case scenario though but not the fiberglass portion of the boat(hull), unless she was pretty bunged up. I know, i have one.

They should be Carling switches.

On the Bimini that i had and the Canyon 336 i have now i NEVER used the tabs and i mean never, there is no need for them. The 330 i had sometimes i had to adjust for leveling but that was couple of times. In my opinion the 306 and the 336 does not really need them.

I have an extra pair, just have to look for them and see what degrees they are. Let me know if you interested and i'll send you couple of pictures.

What Bigfoot says is correct, but, applies to commercial guys, Law enforcement and the like. I am sure i never saw the Police boat getting their motors flush, NEVER and we dock very close, but we hear that they get 4K, 6K, or more hours out of them, but, if you think about it, if the motors work...

For that era motor i don't believe you gonna have a very big problem, most likely you can save the motor(should be a fuse on the motor to protect it from this).

Before you do anything and spend money check that transom. 99.9% is rotted. There is no such a thing as "free boat".

Yes, the hardtop piping.

I also have a two hose set up, one to flush motors(ALWAYS) and one to clean the boat. We, two or three guys, spend at least 45 minutes to an hour to clean the boat, i use Woody Wax boat soap and i will never change it and when all cleaned i towel dry all glass, clear enclosure, aluminum and...

Re: Best Compound and Wax to use to bring back the grady hul Are you spying on me? This what/how i do mine !!!!!! Excellent choice. :wink:

Found some pictures of the panel i did for my Formula restoration.

Much safer to remove and store it flat or hung it.

You can double the 3/4 plywood to 1 1/2". See my above post.

Not at all. She is a great boat for both.

Nice work on the panel but no heat shrink connectors and color coded wires?

With about 200 bucks you can make this out of double 3/4 starboard and have it for ever the first time. Glass will not stay on PT wood for long. After is dry you can actually peal it off by hand. Woodworking skills are great though. To make this out of plywood you don't need any clamps. Just...

I was not talking about a different brand, i am talking about the same you have. They are not Tempres they are made by innovative solutions.

FWIW, overtones has those hatches with the bins for much less. I bought two of them in white(polar white).

I never heard that a surveyor could change the HP rating of a boat as he likes, but maybe i am making a mistake. The thing that i know though is, lets take a Grady 330 pre 2008. Up until 2007 all 330 where rated for 600 HP, some came with HPDI 300's, when they(Grady) change the rating i 2008 to...