Search results

I had 2 Ocean LEDS under the boat, looked great, until one lost the hole LED part, fell off. I went for my lungs and bought 6 Lumitec Seablaze X2. 2 are going under the boat to replace the old lights and 4 on the transom. I had Lumitec on my Marlin and they were great. Expensive but worth it...

I bought one from the dealer for my express, made by Marinco

Dealer in CT had them in stock

I have an 2001 Mine is right under my switch panel at the helm. I just removed the screws, lifted the panel out and was able to get to the relay.

I upgraded to the rub rail with the stainless inset on my Express. The only way to get the blue one is thru Grady. I researched this and found Taco is the manufacturer. I spoke with the rep and he actually was the one that handled the Grady side of it. They cannot sell the blue rub rail to...

I have a 01 330, I just installed a Fusion MSRA770 head unit, replaced the 4 speakers with Fusion 6.5 200 watt speakers. I added 2 in the cockpit, right above the steps on each side. My combing pad covered an access hole that I enlarged to accept the speakers, I had the cushions shortened. All 6...

Changed everything on my 01 I have a gas generator. I put a blanket over the Genny and crawled in. The wire comes in under the water tank, if you follow the wires they come up on the port side of the tank. I cut them at the pump, pulled them out and brought them over the tank. Now you can make...

I put Imtra LED Neon Rope lights under the gunnels, looks great https://www.apexlighting.com/boat-lights/led-strips/led-neon-strip-per-foot/ In the cabin I used scandvik LED reading lights, Imtra under cabinet lights, I found led replacements on line for the 3 round halogens over the v-birth...

I normally run at 28-30 mph and see 1.1 mpg

I re-powered with Yamaha 300s this year, Yamaha dealer said the only difference between 250s and 300s is the Engine control unit. I had no issues with insurance, and the boat shows no signs of problems, Its a great match for this boat, I run Powertech 4 blades 15x15 I cruise at 30 MPH at 4000...

I just bought Power tech OFS4 15.25x15 pitch 4 blade props in June They are on new Yamaha 300s which are on my 2001 3300 Express boat is bottom painted I am still breaking in the motors, but by the weekend i should be able to open them up, boat is full of fuel and water. I can tell you this, we...

Yes, the tiny wires go into the wood, once you take the wood off it’s straight forward, you will see the connection to a larger wire.

Frosted Glass Shade Cabin & Reading Light #41365 LED Frosted Glass Shade Cabin & Reading Light I used this light, its made by Scandvik, mine were pitted so I changed the whole thing. After you remove the lights there were mounting screws for the piece of teak, I cant remember if the screws...

I did stay with theses props 15.25x15 I would of liked a little more RPM at WOT (5500-5600) but after talking to my Yamaha tech, he thought the next prop would over rev the motors I cruise with a full load of fuel and water, 4100 rpms at 29-30 mph, 1.1-1.2 mpg, topping out at 40 mph i really...

I had the pad cut right where it made the angled turn. It was done by an upholstery shop

Here’s a couple of pics of the cockpit speaker and the sub woofer, the cushion use to make the turn and cover an access hole where the speaker is. Had my upholstery guy cut them short.

Heres an update 01 330 Express new Yamaha 300s 4 blade power tech 15.25 x15 pitch Went full throttle today 5500 rpms @40 mph At just over 3/4 throttle I was at the same rpm and speed, nothing changed to full throttle this leads me to believe these are not the right props At 4000 rpms she runs at...

I will take some this weekend.

I have a 01 330, I just installed a Fusion MSRA770 head unit, replaced the 4 speakers with Fusion 6.5 200 watt speakers. I added 2 in the cockpit, right above the steps on each side. My combing pad covered an access hole that I enlarged to accept the speakers, I had the cushions shortened. All 6...

I just bought Power tech OFS4 15.25x15 pitch 4 blade props They are on new Yamaha 300s I am still breaking in the motors, but by the weekend i should be able to open them up, boat is full of fuel and water. I can tell you this, we went out for a ride, 11 people, 4200rpms and we were at 32 mph...