Search results

Are you taling about the 3 in 1 active imaging transducer that mounts to the transfom and sticks out between the engines? Which would you recomend the structure scan 3D or the active imagine HD 3 in 1 . I belive the structure scan 3D requires a sonar module to be added.

Wow Amazing!

Great job! On my 2017 330...I have a live bait well behind the area you placed your sub. Do you have the same? Was there enought space for the sub and ther well to still function?

How did you cut the holes above the helm? Did you use a hole saw or a jig saw? I am afraid of damaging the fiberglass its not very thick there and there is no plywood backing,

I have allways been impressed with the knowlege and thought of the members and greatly appreciate all the advice I have been given. Thank you all in advance. I am looking to upgrade my transducer on on 2017 330 Express. Currently I have an Airmar B60. Reads water temperarture and depth just...

Is ths chanel forward or aft of the midcabin berth? I found a chanel aft of the bearth but have not been successful in getting my fish tape to go thru to the other side. I can get the wire from the radio to the midcabin berth and from the starbord side to the helm, just not across the boat...

Where did you tap into 12 V to piower the unit? Did you run a seperate wire to the fuse panel or " steal" from some other power source?

I have a 2017 330 Express. Need to run a wire from the MFDs down to the radio that is above the TV. Does any one know the path the wire can travel to get behind the microwave and over to the radio? Its only about 3 ft away but I would like the wires to be himded and can't figure out where thy...

Its very thin as you see in the picture. I am afraid that the vibration of the jigsaw would cause cracks in the fiberglass. I used a joigsaw for the cockpit but the opening was reinforced with plywood.

I have a 2017 330 Express. Looking to upgrade all 6 factory provided Fusion Speakers. I have purchased the lastest Garmin Fusion 3i speakers. I was surprised to find out that the inside the cabin 6.5 inch soeakers not a direct replacement for the new 6.5 inch Fusion models. The new models...

I was able to get to it by removing the yamaha computer and take it out like that. Looks like the problem is the truster joystick. Any idea who might still have some old stock GEN 1 controlers?

I have a 2017 330 Express. Trying to remove my Gen 1 Trust Joystick as I suspect it has failed. Any advice how to remove it? I assume I need access from behind? I can’t reach it from the top. Maybe by removing the circuit breaker panel? Any ideas? Thank you!

How did you remove the joystick? Do you need to gain access from behind it?

How much oil did it take? What year is your your Fischer Panda?

@drbatts. Is your antena mounted above or below the radar or approximately in line height wise?

Thanks @drbatts, Do you have a radar on the hardtop? Any signal interference ?

Just ordered the Simrad Wm-4 sirius XM receiver. Anybody had one installed on their 330 Express? Specifically interested in the placement of the antena and receiver and any wiring issues that you may have encountered.

Thanks Hookup! The boat is new to me. During the PPI everything worked. When the boat arrived it was not working correclty. Maybe the PPI guy missed it, I don't know was not there. There is a Big Red emergency disconnect. As soon as I pull it to give power the thrust operates to one side...

I have a 2017 Grady White Express 330. It has a Lewmar Bow thruster with a Lewmar 589002 joystick controller. When I give power to the system it starts right away and only works in one direction. The buttons on the joystick panel do not do anything. If I push the joystick all the way right it...

Which was the correct one? Which size attaches to the hoses that come out of the transom?