Search results

I recently purchased a 1992 GW Seafarer 22, which had the original hydraulic steering. The steering is can be difficult at times, very stiff. I was hoping that I could get some feedback on converting to Fly By Wire. I have seen several systems for sale and was wondering if it is a good move.

I recently purchased a 1992 GW Seafarer and replaced all the decals. I purchased them for $139 off Ebay. The guy actually called me to verify that I was purchasing the correct decals. When I got them, they were perfect. Looks like new. He had to get permission from GW to sell them. He goes by...

Is it necessary to install a pulpit and roller, or can I get away with just a roller installed?

Thank you for the information. This is a big help.

I have a 1992 Seafarer 22 that never had a Windless Anchor installed. I was hoping to get some input from anyone who has added one to a similar boat, anyone who has some advise. I'm not getting any younger and since moving from a bay boat to a Grady, the anchor is just getting bigger and bigger...

I have a 1992 Seafarer 22 that doesn't have a wash down tank. Do they make tanks I could add. There is a large empty space under the floor in front of my gas tank. I was thinking of adding one there.

I have a 1992 GW Seafarer 22 with the original plastic seats. I want to upgrade but need advise when it comes to installing the new chairs. I don't want to add a bunch of new holes where it mounts to the boat. Any suggestions? Thanks for your input. John

I have a 1992 GW Seafarer 22 and am trying to find out the size of my tank without taking the floor out. Does anyone have any idea. I just has a new Suzuki 200 installed and need to program the gage for accurate calculation on fuel consumption. Thanks for you help.

I am looking to purchase an electric winch on my 1992 GW Seafarer 22’s Venture trailer and hoping for some suggestions. Hopefully one that won’t break the bank. Thanks

I don't mind screwing in multiple screws for each tab as long as the screw is not penetrating all the way thru the transom. My goal is to install trim tabs with out multiple screw holes that go all the way thru the transom....

I'm gathering info from everywhere to make a decision.

I understand you must drill holes, but whether they go all the way through is my concern. I see some installations putting screws in, but the screw hole and screw doesn’t go all the way through the transom. That is the type of tabs I want. Thanks for your input.

I watched a video where the guy put multiple holes thru transom and secured the tab with bolts. I want to avoid putting multiple holes in my transom.

Here is the drain plug. As you can see, it is a half inch drain plug with a drain in the middle. The size alluded my, but once I realized I only needed a half in plug, I was good to go...

I have a GW Seafarer 22 (1992). I want to install trim tabs and have seen several types on the market. I'm leaning toward the electric opposed to the hydraulic kind that don't require drilling holes completely thru the transom with the exception of the hole for the wires. I was hoping someone...

I found out my dilemma... The drain plug is 1/2 inch but it is a drain plug with a drain plug inside it, which is a smaller diameter. I removed the 1/2 inch with the whole and put a normal 1/2 inch and now I'm in business. Thanks for all the advice.

I measured my drain plug and the whole is about 1/2 inch. I bought 1/2 inch but they are to big. Does any one have a boat like this and know what size drain plug to use. I know this sounds crazy but I'm not sure on how to measure the whole and which drain plug to buy. Thanks for any help!

I recently purchased a 1992 Seafarer 22. The windshield has many stickers on it that have faded and need to be taken off. Does anyone know if this boats windshield is Plexiglas or glass? I don't want to use a chemical that would damage the Plexiglas but I can't tell if it is real glass or not...

I had to remove the rear floor panel on my GW Seafarer 22 to expose the well intake and lines. I noticed there was a clear silicone surrounding the edge of the panel. When reinstalling the floor panel, is it wise to apply a type of silicone around the edge to seal it and if so, what kind of...

1992 Seafarer 22